January 7, 20251 yr Following on from my earlier post: I triggered the transfer using Dynamix File Manager Plugin and the ETA was about 7 hours with transfer speeds around 100MB/s ish So I left this transferring overnight but upon checking the system it had slowled down to about 8-12MB/s and possibly unrelated the Unraid GUI was no longer accessible via hostname, I had to use the IP. tower-diagnostics-20250107-1720.zip
January 7, 20251 yr Community Expert Solution Diags show that it's currently writing at around 36MB/s, which is about right for normal write mode with the disks you have, you can enable turbo write, it should be considerably faster, at the expense of the disks not spinning down during writes, but you can use just for server initial load for example
January 7, 20251 yr Author Thanks so much, the write speed is now 20 to 30MB/s. I will disable this mode once the copy has completed.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.