January 8, 20251 yr Hi All, Received errors post parity check this month. Initial issue stated that the filesystem had failed, after searching forums tried XFS Repair and managed to get drives back into array but now being emulated and unable to spin up. Any help would be greatly appreciated. Diagnostics file attached superserver-diagnostics-20250108-1944.zip
January 9, 20251 yr Community Expert There are two disabled disks and errors on a 3rd one, run an extended SMART test on disk7 and post new diags after rebooting and starting the array.
January 10, 20251 yr Author On 1/9/2025 at 7:47 AM, JorgeB said: There are two disabled disks and errors on a 3rd one, run an extended SMART test on disk7 and post new diags after rebooting and starting the array. Hi Thanks for the response and help. I have tried running the extended test a couple of times and each time it stops at 90%. Currently getting close to 24 hrs since start of test on a 2tb drive. I have attached a new diag if that shows anything superserver-diagnostics-20250110-1752.zip
January 10, 20251 yr Community Expert Emulated disks are mounting which is good, but SMART for disk7 doesn't look great, let's wait a few more hours to see if it finishes, there could be low sector zones.
January 10, 20251 yr Author 3 hours ago, JorgeB said: Emulated disks are mounting which is good, but SMART for disk7 doesn't look great, let's wait a few more hours to see if it finishes, there could be low sector zones. OK disk7 finished Diags attached superserver-diagnostics-20250110-2023.zip
January 11, 20251 yr Community Expert Test passed, so the disk should be OK for now, but probably still worth replacing once the rebuild is done, since i nothing else, it will probably be slower than it should, try rebuilding both disks now.
January 11, 20251 yr Author 1 hour ago, JorgeB said: Test passed, so the disk should be OK for now, but probably still worth replacing once the rebuild is done, since i nothing else, it will probably be slower than it should, try rebuilding both disks now. Hey Thanks for all the help but how do I rebuild the drive. do I need new disks?
January 11, 20251 yr Community Expert Solution 5 minutes ago, scano_ie said: but how do I rebuild the drive If the emulated disks look OK and the drives pass the extended SMART test you can use the procedure documented here in the online documentation accessible via the ‘Manual’ link at the bottom of the GUI or the DOCS link at the top of each forum page. The Unraid OS->Manual section in particular covers most features of the current Unraid release.
January 13, 20251 yr Author On 1/11/2025 at 10:05 AM, itimpi said: If the emulated disks look OK and the drives pass the extended SMART test you can use the procedure documented here in the online documentation accessible via the ‘Manual’ link at the bottom of the GUI or the DOCS link at the top of each forum page. The Unraid OS->Manual section in particular covers most features of the current Unraid release. Worked thank you so much for your help and patience you are a superstar
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.