January 12, 20251 yr Hi there, my Nextcloud was acting up, so I closed it and wanted to pull a quick backup. However, I noticed I can't create folders anymore - I get the Error 0x8007045D in Windows. In Krusader however, I also can't create any folders. I noticed that for two days or so, the Dashboard of unRAID as well as the Console load very slowly. Like, it's all there, but anything regarding Array and Pools takes some time, and the Console loads slowly as well. It says all drives are healthy, but I guess this can't be the case, right? lunas-diagnostics-20250112-1518.zip
January 12, 20251 yr Community Expert Solution Disk7 has fs issues, check filesystem on that disk, run it without -n
January 12, 20251 yr Author Hi JorgeB, so in this case I'd type xfs_repair -v /dev/md7 into the Console?
January 12, 20251 yr Community Expert 2 minutes ago, CameraRick said: so in this case I'd type xfs_repair -v /dev/md7 into the Console? No, see the link, use the GUI option.
January 12, 20251 yr Author I see, thanks! I'm already struggling with the first bulletpoint tho: Quote Make sure that you have the array started in the correct mode. If necessary stop the array and restart in the correct mode by clicking/unclicking the Maintenance Mode checkbox next to the Start button. What is "correct" in this case - Maintenance or not? Is it dangerous to put the test in normal operation, as I am doing some sort of Maintenance right now?
January 12, 20251 yr Author Good thing I asked thanks for your support! I removed the -n: Phase 1 - find and verify superblock... Phase 2 - using internal log - zero log... - scan filesystem freespace and inode maps... agi_freecount 153, counted 154 in ag 1 agi_freecount 159, counted 158 in ag 0 - found root inode chunk Phase 3 - for each AG... - scan and clear agi unlinked lists... - process known inodes and perform inode discovery... - agno = 0 - agno = 1 - agno = 2 - agno = 3 - agno = 4 - agno = 5 - process newly discovered inodes... Phase 4 - check for duplicate blocks... - setting up duplicate extent list... - check for inodes claiming duplicate blocks... - agno = 0 - agno = 3 - agno = 2 - agno = 4 - agno = 5 - agno = 1 clearing reflink flag on inodes when possible Phase 5 - rebuild AG headers and trees... - reset superblock... Phase 6 - check inode connectivity... - resetting contents of realtime bitmap and summary inodes - traversing filesystem ... fixing ftype mismatch (2/1) in directory/child inode 754388274/11374428779 - traversal finished ... - moving disconnected inodes to lost+found ... disconnected dir inode 754388274, moving to lost+found Phase 7 - verify and correct link counts... resetting inode 22638815 nlinks from 2 to 3 resetting inode 11374428779 nlinks from 1 to 2 resetting inode 754388274 nlinks from 3 to 2 done
January 12, 20251 yr Community Expert When you restart the array in Normal mode hopefully things now work as expected.
January 12, 20251 yr Author Hi there itimpi, I started the Array as usual and I can create folders, and the Nextcloud also acts normal. Well not normal, but as usual It still takes a long time to show Array/Pool info on the Dashboard, as well as starting the Console 😮
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.