cappiel Posted April 7, 2012 Share Posted April 7, 2012 Hi everyone, I had everything up and running pretty smoothly following all the procedures on the site. I tried to install mysql for my xbmc. I tried to do a reboot and once it reboots, tower is active for about 30 seconds then i cannot connect to the server from another pc. Not sure what's up. I have a feeling its my old cache drive. Any ideas? I believe this is the correct syslog syslog-20120407-105802.txt Quote Link to comment
cappiel Posted April 7, 2012 Author Share Posted April 7, 2012 here's another piece of the syslog http://dl.dropbox.com/u/23971186/syslog-20120407-105808.txt Quote Link to comment
emagsamurai Posted April 7, 2012 Share Posted April 7, 2012 Are you saying that you can connect initially, but after 30 seconds the connection is lost? Are you connecting using your browser based configuration page, or have you tried to connect via telnet? Do you have a monitor connected? Quote Link to comment
cappiel Posted April 7, 2012 Author Share Posted April 7, 2012 Cannot connect via web or telnet. I don't have a monitor hooked up. If I have too I can take my regular pc one downstairs and hook up Quote Link to comment
emagsamurai Posted April 7, 2012 Share Posted April 7, 2012 Is your ip address static? Just wondering if you can check to see if your router has decided to assign your server a new ip? Can you look at your router to verify the server is actually being assigned an ip? This sounds similar to what happened to me yesterday. My motherboard decided to reassign my primary boot device to one of the data drives in my array. Obviously I couldn't connect over the network as the system wasn't booting up. It may be worth dragging out the monitor to make sure you are actually booting to the flash drive. Quote Link to comment
cappiel Posted April 7, 2012 Author Share Posted April 7, 2012 I do have a static ip assigned. Strange. Alright maybe I'll try tht tonight Quote Link to comment
Helmonder Posted April 7, 2012 Share Posted April 7, 2012 Sounds like you might have something starting up that gives a problem on the server... There must be a "start in plain vanilla mode" option somewhere ? What happens when you login to telnet in the 30 seconds and wait what happens ? Quote Link to comment
cappiel Posted April 8, 2012 Author Share Posted April 8, 2012 Looks like its getting stopped at the following "tower login: xargs: sh: terminated by signal 9" Then a long MySQL error. Quote Link to comment
cappiel Posted April 8, 2012 Author Share Posted April 8, 2012 Alright, deleted the mysql packages from the packages install folder. now everything is back to normal whew! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.