January 19, 20251 yr Hello, I want to first off thank everyone for their questions and the details in the answers given. As a brand new person to anything even remotely seen as programming; this community has been instrumental in allowing me to make mistakes and understand how to correct. Its been fun! Now that the butt kissing is over. Ive seen this discussed over and over. Ive seen anywhere from you have network issue and its unstable, to its normal, to are you happy with the performance? then dont worry about it. So out of curiousity, is there any definitve answer to this? Thank you for your time in reading. Hitock
January 19, 20251 yr Community Expert If that keeps spamming the log, you may have a container constantly restarting, check their uptimes.
January 20, 20251 yr Author 6 hours ago, JorgeB said: If that keeps spamming the log, you may have a container constantly restarting, check their uptimes. All show up for 11 hours. I reset the dockers to see if that would have fixed.
January 20, 20251 yr Author 13 minutes ago, Hitock said: All show up for 11 hours. I reset the dockers to see if that would have fixed. I should clarify. When i posted the first log. I then reset the dockers. I left just got a chance to look again. Below is the the new log.
January 20, 20251 yr Author 6 hours ago, JorgeB said: Last several hours from the log don't show those messages. I see that. I wasnt home and not using. I fired up the plex and tried to watch my iptv at the sametime as these errors started. My best guess is if i use the plex app on firestick it does this. The stream would play 20 secs or so then buffer for 30 then go back and repeat. Repeat what it played. Buffer. Then cycle again. The timing fits. Nothing else was happening with the server. So im running threadfin to translate the iptv signal to plex. But again, it just firestick. Im going to try the native plex app on my tv to see if its that.
January 20, 20251 yr Community Expert Those observations might be explained by your FireTV not maintaining a wifi connection. Can you use plex good from a hard wired PC or a wifi device with an unobstructed view to your AP?
January 20, 20251 yr Author Quote My plex computer is connected to the wifi router via cat. I ran a cat from the tv to the wifi router. Used the native plex app on my tv. Now i have no errors. No errors. No logs. SO there's that. BUT the no matter what channel i use its playing approx 40 secs. Then goes back to the beginning. Plays the exact same 40s over and over. No buffering. Clear picture. Just a perfect replay over and over. Nothing on the logs.
January 20, 20251 yr Author Here is the log inside the GUI of threadfin. You can see it restarting but on the restart it rewinds slowly creeping forward in time. Ive tried XTEVE but its not being updated. SO i gave threadfin a shot. Any other alternatives to those two?
January 22, 20251 yr Community Expert 2 minutes ago, Hitock said: Closing this and opening another on same issue but with better info. Would have been better if you had just posted that better info and continued in this same thread. If you do start another thread, be sure to include a link to this one for more context.
January 22, 20251 yr Author I can keep this going. I’ve isolated the issue with the blocking state, promiscuous questions… it happens everytime I start a docker or stop one. As far as the IPTV. I deleted threadfin and installed Stream Master. Same issue. It will play for 30 seconds then repeat. Log from Threadfin.
January 22, 20251 yr Community Expert 26 minutes ago, Hitock said: it happens everytime I start a docker or stop one. That is normal, it's only not normal if it keeps repeating that continuously forever.
January 22, 20251 yr Author It only happens when turn on or off. So thanks. My real issue is the IPTV looping via Plex. I thought that has something to do with it. I posted my log from Stream Master. If I need to start a new thread. Lmk
January 22, 20251 yr Community Expert Solution 3 hours ago, Hitock said: If I need to start a new thread. Lmk Starting a new thread is usually suggested to someone else when they try to get support for their (seemingly similar) problem in the same thread.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.