January 20, 20251 yr Hello, I got into problems after i wanted to open the webpage of unraid and clicked selected the *http://192.168.1.248:9980/webGui/include/Boot.php" link from my browser history without looking to the exact link, My server did than a shutdown and thatś when the problems started. I got the message as seen on the image "Kernel Panic", After a reboot(reset). The Cache drive is dismounted as seen in the image also there is the message "Unclean shutdown Detected". What is now the best way to proceed i am able to add the cache drive. How can i do this without the data-loss on my cache drive? Thanks in advance,
January 20, 20251 yr Why not take some screenshots instead of photos? It would be much clearer. Start the array with the cache assigned and post new diags if it doesn't mount.
January 20, 20251 yr Author 1 hour ago, JorgeB said: Why not take some screenshots instead of photos? It would be much clearer. Start the array with the cache assigned and post new diags if it doesn't mount. Sorry, Thatś because the external webpage isn´t working only the local, So i hookup a display to the system and do it directly. Sorry i do have this one from syslog tower-diagnostics-20250120-1047.zip Edited January 20, 20251 yr by DuckWaze Added Log from before re-adding cache
January 20, 20251 yr Author I added the Cache driver en started the array then firefix local crashed and was unable to do anything in the gui anymore. After a while i shutdown the system by the cli with "shutdown" when i start up now to "start with GUI" the system locks on the login screen and i am unable to login. Keyboard isn´t responding and numlock isn´t reacting, When i ping to the IP i get no reaction. After a boot without ¨ Safe mode - no plugin" the systeem boot with black screen no system info when booting on the screen just black but turned on. After a while i am now able to ping. But no web interface.
January 20, 20251 yr Author I did discovery that in the safe mode the port changed to :80 instead of :9980 what my setting was, So now i am in the GUI back again, tower-diagnostics-20250120-2054.zip Edited January 20, 20251 yr by DuckWaze added files
January 22, 20251 yr Author On 1/21/2025 at 7:47 AM, JorgeB said: And does the cache mount now? If not, post new diags after array start. Hi Jorge, Yes also the Parity Check when good. The dockers are running without a issue. Last check completed on Wed 22 Jan 2025 09:28 AM (today) Duration: 1 day, 10 hours, 6 minutes, 44 seconds. Average speed: 146.6 MB/s Finding 0 errors. Should i do a reboot to normal mode now?
January 22, 20251 yr Author 1 hour ago, JorgeB said: You can try. Hi Jorge, When i do a reboot to normal mode it won´t come back online. I when back to safe mode "without plugin" and it came back online. THanks
January 22, 20251 yr That suggests a plugin is the problem, try renaming all *.plg files on /config/plugins, then retest.
January 22, 20251 yr Author 1 hour ago, JorgeB said: That suggests a plugin is the problem, try renaming all *.plg files on /config/plugins, then retest. Hi JorgeB, Still no boot when starting to normal mode, I do get this error as seen on the picure (sorry again from the phone). When i started back to Safe mode "No plugin". It gets back online and i started the array.
January 23, 20251 yr Make sure all plugins were removed, you can also try redoing the flash drive, backup the current one first and then recreate it using the USB tool and just restore the bare minimum, like the key, super.dat and the pools folder for the assignments, also copy the docker user templates folder (\config\plugins\dockerMan\templates-user), if all works you can then reconfigure the server or try restoring a few config files at a time from the backup to see if you can find the culprit.
January 25, 20251 yr Author On 1/23/2025 at 7:43 AM, JorgeB said: Make sure all plugins were removed, you can also try redoing the flash drive, backup the current one first and then recreate it using the USB tool and just restore the bare minimum, like the key, super.dat and the pools folder for the assignments, also copy the docker user templates folder (\config\plugins\dockerMan\templates-user), if all works you can then reconfigure the server or try restoring a few config files at a time from the backup to see if you can find the culprit. Hi Jorge, Removing or Renaming, I renamed them all to .old, Do i also need to do the folders? Can you tell me if like the cpu/gpu plugin change settings somewhere else and where to find them for example the intel-gpu-top/>
January 25, 20251 yr Author On 1/23/2025 at 7:43 AM, JorgeB said: Make sure all plugins were removed, you can also try redoing the flash drive, backup the current one first and then recreate it using the USB tool and just restore the bare minimum, like the key, super.dat and the pools folder for the assignments, also copy the docker user templates folder (\config\plugins\dockerMan\templates-user), if all works you can then reconfigure the server or try restoring a few config files at a time from the backup to see if you can find the culprit. 6 hours ago, DuckWaze said: Hi Jorge, Removing or Renaming, I renamed them all to .old, Do i also need to do the folders? Can you tell me if like the cpu/gpu plugin change settings somewhere else and where to find them for example the intel-gpu-top/> Hi Jorge, I made a back-up of the 3 plugin folders (Plugin, Plugin - error and plugin removed) then i emptied them and did a reboot. Seems that the system is running good now. I reinstalled the com. plugin. I do notice that my dockers are missing some functions. Do you now the solution to this? I found out that when i re-added the files from template-user the option is back. Do i have to put other files back, I emptied all files in (Plugin, Plugin - error and plugin removed) Also i found Batman?.. This file is not pressed in the new installed com.plugin THnaks Edited January 25, 20251 yr by DuckWaze Batman?
January 26, 20251 yr 16 hours ago, DuckWaze said: Do i have to put other files back, I emptied all files in (Plugin, Plugin - error and plugin removed) Some plugins folders are parts of a stock install, but you can copy from the zip. 16 hours ago, DuckWaze said: Also i found Batman?.. You can delete that.
February 9, 20251 yr Author On 1/23/2025 at 7:43 AM, JorgeB said: Make sure all plugins were removed, you can also try redoing the flash drive, backup the current one first and then recreate it using the USB tool and just restore the bare minimum, like the key, super.dat and the pools folder for the assignments, also copy the docker user templates folder (\config\plugins\dockerMan\templates-user), if all works you can then reconfigure the server or try restoring a few config files at a time from the backup to see if you can find the culprit. Hi Jorge, I still have the same problems so i decided to do replace the USB key with you steps. 1. Recreate it using the USB tool 2. Restored "super.dat and the pools folder for the assignments and disk.cfg" I booted the system and manually started the array without any problem. But when i install the "Community plugin" the systems start showing blank screens everywhere. Like in the screenshot i am able to ping the server but the webpage is unusable. I am able to use the terminal for example Ifconfig. But clicking on the log button doesn't do anything. Do you have any suggestions for this issue? Thanks Edited February 9, 20251 yr by DuckWaze Added info/Spell error
February 9, 20251 yr Try using a different browser, and make sure no ad-blocker/firewall is blocking the GUI
February 9, 20251 yr Author 1 hour ago, JorgeB said: Try using a different browser, and make sure no ad-blocker/firewall is blocking the GUI Hi, I tested it with Firefox, Edge en Librewolf. In normal mode & private mode. On my other notebook it's the same issue. The strange thing is that it just started when installing the "Community plugin" in combination with a running Array. "Community plugin" with the array offline doesn't give a problem in de browser. But when i click to start array after a few sec. i get the screens like above.
February 9, 20251 yr Author When i tried to make a diagnostics by terminal i get the following root@Tower:~# diagnostics Segmentation fault
February 10, 20251 yr That's a strange error to get just w«downloading the diags, this is still with the new config?
February 12, 20251 yr Author On 2/10/2025 at 7:46 AM, JorgeB said: That's a strange error to get just w«downloading the diags, this is still with the new config? Yes, This is only with the settings as mention above 1. Recreate it using the USB tool 2. Restored "super.dat and the pools folder for the assignments and disk.cfg" 3. I also did a second memory check with same results. But i can run the parity without any issue's until i install or start the community plugin together with a running parity. So i am wondering if the community plugin is using some "corrupt" file on the disk that could get it to crash. May-by if i can replace/delete that file it would solve the issue? At this moment i deleted the community plugin again en restarted the server and parity, It's now running the parity check. I will let the server run like this. With only the parity started and without the community plugin to see what will happen. I did a new diag with the current setup for you(?), Thanks. tower-diagnostics-20250212-1905.zip
February 12, 20251 yr 19 minutes ago, DuckWaze said: Enjoy your beer in the mean time mate Thanks! So, if you install CA, the parity check crashes? Do would be very strange.
February 15, 20251 yr Author On 2/12/2025 at 6:31 PM, JorgeB said: Thanks! So, if you install CA, the parity check crashes? Do would be very strange. Hi Jorge, Sorry for the delay, But the server is not at my home and i sometimes want to keep it running for x hours to see the effect of changes. No that's not what i mean, It seems that when i have the CA installed together with the Array running (I named it wrong "running parity" i mean running Array). The system crashed when i had a running ARRAY and installed the CA, On the installation screen of the CA it was only white, And the server didn't respond. So then i shutdown the server removed the CA plugin and started the server and everything was good. So i installed the CA with a stopped ARRAY and the where no problems. Then i stared the Array and it when down again. So i removed the user docker templates and started again, Now it's running for 3 day's and i installed today the CA and it keeps running. Could it bee that the user templates could cause this when i already exist in the folder and the are mayby corrupt/misconfiguration? Thanks,
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.