January 20, 20251 yr Hello all, after upgrading my hardware my parity sync has become unreasonably slow. usually takes about 24hours to complete, now its reporting about 150 days at 1-2MB/s. I upgraded to the HL15 case with the 45drives black plane and Sata HDDs, which are connected to a lenovo 430-16i hba, then a i9900k system. I don't think its a hardware issue, and had checked the connectors. Please take a look at the diagnostics attached and help me find the problem. Thank you in advance for your assistance. bastion-diagnostics-20250121-0508.zip
January 20, 20251 yr Community Expert Solution Jan 21 04:36:01 Bastion kernel: mpt3sas_cm0 fault info from func: mpt3sas_base_make_ioc_ready Jan 21 04:36:01 Bastion kernel: mpt3sas_cm0: fault_state(0x2100)! Jan 21 04:36:01 Bastion kernel: mpt3sas_cm0: sending diag reset !! Jan 21 04:36:02 Bastion kernel: mpt3sas_cm0: diag reset: SUCCESS Controller issues, make sure it well seated and sufficiently cooled, you can also try a different PCIe port.
January 21, 20251 yr Author Thank you, will take a look. Could you tell from the diagnostic report if the fault is with the hba or motherboard controller? Thank you
January 21, 20251 yr Author Thank you very much, I can confirm it was the HBA overheating. Rearranged the PCIe cards and placed a fan to blow on the HBA, and now the parity sync speed is as expected.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.