January 21, 20251 yr Hello folks, I have a Terramaster D8 USB 3 enclosure that can house 4 3.5" drives (via SATA) and 4 m.2 nvme drives. When full of drives and connected to Unraid, all 4 3.5" disks show up as individual disks and work fine (can be added as pool devices, etc). However, when there are 3 m.2 drives (and I assume 4, I just don't have 1 more to test) hooked up, only one seems to work at a time. I can only mount 1 at a time or use 1 at a time as a pool device. The others show up in Unassigned Devices but I can't do anything with them: Is this an issue with the device I'm using, or an Unraid limitation, or something incorrect with my configuration? Thanks for the thoughts! orthanc-diagnostics-20250121-1719.zip Edited January 21, 20251 yr by bwitting
January 22, 20251 yr Community Expert Solution Both are showing up with the same ID, this can happen with some USB bridges, Unraid requires unique ones.
January 22, 20251 yr Author For anyone stumbling on this in the future, there is a firmware fix for my specific device (Terramaster D8): https://forum.terra-master.com/en/viewtopic.php?t=6748 This fixed the problem and I can now use each m.2 drive.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.