January 26, 20251 yr Hello, I have a problem to assign my gpu to my unraid. Whe i want to assign my gpu to the vfio, i restart my unraid and that stucks on overlay mounted on /lib. I have to delete the vfio-pci.txt to make it boot again. What can i do ?
January 27, 20251 yr Then it's normal that you will lose monitor output during boot, but Unraid should still be starting, see if you can access the WebGUI over the LAN
January 27, 20251 yr Author I don’t lose the monitor output it’s just stuck on this line, I already tried to access over the lan and i can’t :(. can i try to plug the hdmi cable directly on motherboard and not via gpu ?
January 27, 20251 yr Solution 2 minutes ago, SeaHeaven said: I don’t lose the monitor output it’s just stuck on this line That's normal, at some point the GPU gets detached from unraid as it was bound to vfio so the display just freezes in its last state. 2 minutes ago, SeaHeaven said: can i try to plug the hdmi cable directly on motherboard and not via gpu ? Depends what hardware you have/if your CPU has a built-in GPU. If so BIOS needs to be set to keep the iGPU enabled and to have it as primary. Edited January 27, 20251 yr by Kilrah
January 29, 20251 yr Author Hello, Sorry for the late reply. WHen i put the hdmi cable to the motherboards directly that's worked thanks !
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.