April 14, 201214 yr Upgraded my server to a i3 setup this last week. Sucessfully carried out an initial Parity build and Parity check. I actually swapped over from my old kit, checked drives worked ok then replaced my Parity drive with a 2TB WD20EARX as the start of my progressive upgrading. Machine is running: i3-2120 http://ark.intel.com/products/53426/Intel-Core-i3-2120-Processor-(3M-Cache-3_30-GHz) Intel DH61CR http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/desktop-board-dh61cr.html 4GB Kingston Value DDR3 Startech 2 Port SATA2 PCIe Card Also to note, I'm running a Dlink DGE-530T 10/100/1000 Gigabit Desktop PCI Adapter as the Intel onboard adapter isn't supported on 4.7 which I'm currently running. I do plan to upgrade to the latest beta soon which should bring support for the onboard NIC but for the time being the dlink is working fine. Hope I've included everything needed I would like to give a little back as the forum / support have been very good since I found unraid a couple year back - I've attached the syslog which should show the initial parity build and the parity check required for Level 1 testing. syslog-2012-04-14.txt
Archived
This topic is now archived and is closed to further replies.