February 6, 20251 yr Servus zusammen, schon wieder ein neues Problem bei mir. Seit einiger Zeit kann ich das Array nicht mehr manuell beim Klick auf "Stop" im Main-Tab stoppen. Es kommt dann immer die Meldung im Footer, dass "Array stopping- Retry unmounting disk share(s)". Wenn ich das komplette System reboote funktioniert es irgendwann - allerdings kommt dann auch die Meldung "unclean shutdown detected" und die Parity muss neu überprüft (Parity Check) werden - also kein sauberer Shutdown. Ich habe im englischen Forum gelesen und auch bemerkt, dass es bei Unraid 6.x.x ähnliche Probleme gab und "umount /var/lib/docker" helfen soll, klappt aber bei mir nicht, da die Meldung kommt "not mounted". Ich habe auch bevor ich das Array versucht habe zu stoppen manuell den Docker Dienst angehalten. Docker scheint also das Stoppen des Arrays nicht zu verhindern. Ansonsten sind keine SSH Verbindungen geöffnet oder sonstiges. Laut dem Log scheint das hier das Problem zu sein: Feb 6 13:26:01 NAS emhttpd: shcmd (556854): /usr/sbin/zpool export -f cache Feb 6 13:26:01 NAS root: cannot export 'cache': pool is busy Feb 6 13:26:01 NAS emhttpd: shcmd (556854): exit status: 1 Feb 6 13:26:01 NAS emhttpd: Retry unmounting disk share(s)... Feb 6 13:26:06 NAS emhttpd: Unmounting disks... Feb 6 13:26:06 NAS emhttpd: shcmd (556855): /usr/sbin/zpool export -f cache Feb 6 13:26:19 NAS root: cannot export 'cache': pool is busy Feb 6 13:26:19 NAS emhttpd: shcmd (556855): exit status: 1 Feb 6 13:26:19 NAS emhttpd: Retry unmounting disk share(s)... Feb 6 13:26:24 NAS emhttpd: Unmounting disks... Nur hab ich keine Idee was ich damit anfangen soll. Hat noch jemand eine Idee? Danke vorab Grüße Edited February 6, 20251 yr by independence Infos ergänzt
February 7, 20251 yr It means something is using the pool, with Unraid the most common reason is docker, if this always happens, recommend disabling the docker service before array start, start the array and see if the array stops to confirm.
February 9, 20251 yr On 2/6/2025 at 1:17 PM, independence said: Feb 6 13:26:01 NAS emhttpd: shcmd (556854): /usr/sbin/zpool export -f cache Feb 6 13:26:01 NAS root: cannot export 'cache': pool is busy Feb 6 13:26:01 NAS emhttpd: shcmd (556854): exit status: 1 Feb 6 13:26:01 NAS emhttpd: Retry unmounting disk share(s)... Feb 6 13:26:06 NAS emhttpd: Unmounting disks... Feb 6 13:26:06 NAS emhttpd: shcmd (556855): /usr/sbin/zpool export -f cache Feb 6 13:26:19 NAS root: cannot export 'cache': pool is busy Feb 6 13:26:19 NAS emhttpd: shcmd (556855): exit status: 1 Feb 6 13:26:19 NAS emhttpd: Retry unmounting disk share(s)... Feb 6 13:26:24 NAS emhttpd: Unmounting disks... Nur hab ich keine Idee was ich damit anfangen soll. Hat noch jemand eine Idee? Das Problem tritt dann auf, wenn da noch irgendwas drauf zugreift. In diesem Fall blockiert irgendwas deinen Pool. Sei es ein Docker, eine VM oder auch eine andere Operation (User Script, Filemanager usw.). Schau mal hier:
February 17, 20251 yr Author @Cannon den Thread hab ich gelesen und die Probleme scheinen identisch zu sein. Bei mir ist es auch der Cache der noch beschäftigt ist und das herunterfahren behindert.. Aber leider kann ich daraus nicht ableiten was ich tun soll um das Problem zu lösen. Ich hab "OpenFiles" installiert und mir wird da auch ne Latte an Prozessen angezeigt aber wenn ich auf "Kill" klicke, passiert auch einfach nichts.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.