February 7, 20251 yr I recently added 2 IronWolfPro drives to my array. They are both 16TB. Some days ago 1 of the drives was disabled, I am guessing during the parity check and has a bunch of errors displayed on it. When searching a bit online I found that there is an issue with LSI cards and Ironwolf on unraid. So I Performed the steps to disable low current spin-up and EPC. Now I added the drive back to my array and it is accessible again. But the drive is already showing some S.M.A.R.T. errors. I hopefully added the correct diagnostics to the topic. I ran a short SMART self test which is also attached. Is my drive already toast? There was no data written to it yet. Or is there some other issue with IronWolfs that I am not aware of. Also is this reaon enough for a RMA? BeforeHDDFirmwareChange.zip AfterHDDFirmwareChange.zip unraidrack-smart-20250207-1949.zip
February 7, 20251 yr Community Expert Solution Disk has pending sectors and failed the SMART test, so it needs to be replaced, note that this is unrelated to the Ironwolf/LSI issues, the disk is just failing.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.