February 12, 20251 yr Please help. I wanted to remove a drive from my array, so I selected new config but I didn't preserve current assignments, now I don't know which drives where my parity drive when I reassign the drives, and I don't want to lose any data. I have the drive I wanted to remove and it is working. str8nas-diagnostics-20250212-1436.zip
February 12, 20251 yr Community Expert Solution Assuming the devices are the same as the previous boot: Feb 12 13:54:54 Str8NAS kernel: md: import disk0: (sdj) WDC_WD80EFBX-68AZZN0_VRJG1G9K size: 7814026532 Feb 12 13:54:54 Str8NAS kernel: md: import disk1: (sdi) WDC_WD80EFZZ-68BTXN0_WD-CA3TXH0K size: 7814026532 Feb 12 13:54:54 Str8NAS kernel: md: import disk2: (sdg) WDC_WD82PURZ-85TEUY0_VGJV43KG size: 7814026532 Feb 12 13:54:54 Str8NAS kernel: md: import disk3: (sdd) WDC_WD60EFPX-68C5ZN0_WD-WX22D93KVE2Y size: 5860522532 Feb 12 13:54:54 Str8NAS kernel: md: import disk4: (sdh) WDC_WD62PURZ-85B3AY0_WD-C810UZRG size: 5860521540 Feb 12 13:54:54 Str8NAS kernel: md: import disk5: (sde) WDC_WD40EFZX-68AWUN0_WD-WX32DA0933PD size: 3907018532 Feb 12 13:54:54 Str8NAS kernel: md: import disk6: (sdc) WDC_WD60EFAX-68JH4N1_WD-WX32D80CE1YE size: 5860522532 Feb 12 13:54:54 Str8NAS kernel: md: import disk7: (sdf) WDC_WD40EFZX-68AWUN0_WD-WX32DA093T6E size: 3907018532 Feb 12 13:54:54 Str8NAS kernel: md: import_slot: 8 missing Feb 12 13:54:54 Str8NAS kernel: md: import disk29: (sdk) WDC_WD8003FFBX-68B9AN0_VYK3RM0M size: 7814026532 Disk 0 is parity, disk29 is parity2, but disk8 was missing.
February 12, 20251 yr Author Thank you@JorgeB, I have reconnected disk8, would you recommend reassigning them all in the same positions to check everything is fine? Also should I tick parity is already valid Edited February 12, 20251 yr by Str8NAS
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.