February 21, 20251 yr at first sry for my english but i try my best. i am new on unraid. before i used OMV i biuld a new nas. i bought an ugreen dxp 2800 + 2 x 10 tb wd red pro + 2 x 1 tb WD Black m2 ssds ( install was easy) my network is already 2,5 g my array are both 10 tb in xfs and one is parity my cache are both ssds in raid 1 when i wirte files from my windwos pc i only get streight 1 gb/s when i write from my nas to my pc i get close to 2 gb/s what a tryed 1# i installed a docker container with ipref test from win pc to nas Connecting to host 192.168.178.46, port 5201 [ 5] local 192.168.178.47 port 54902 connected to 192.168.178.46 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.01 sec 128 MBytes 1.07 Gbits/sec [ 5] 1.01-2.00 sec 126 MBytes 1.06 Gbits/sec [ 5] 2.00-3.00 sec 126 MBytes 1.06 Gbits/sec [ 5] 3.00-4.01 sec 127 MBytes 1.06 Gbits/sec [ 5] 4.01-5.01 sec 126 MBytes 1.06 Gbits/sec [ 5] 5.01-6.01 sec 126 MBytes 1.06 Gbits/sec [ 5] 6.01-7.01 sec 127 MBytes 1.06 Gbits/sec [ 5] 7.01-8.01 sec 126 MBytes 1.06 Gbits/sec [ 5] 8.01-9.01 sec 127 MBytes 1.06 Gbits/sec [ 5] 9.01-10.01 sec 129 MBytes 1.08 Gbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.01 sec 1.24 GBytes 1.06 Gbits/sec sender [ 5] 0.00-10.03 sec 1.24 GBytes 1.06 Gbits/sec receiver iperf Done. 2# checking network in windows. power up pc to high level. checking network in nas bond0fault-tolerance (active-backup), mtu 1500 eth02500 Mbps, full duplex, mtu 1500 tryed different modi for fault-tolerance 3# try a smb only on cache / same result. 127mb/s thx for help i have no new idears
February 21, 20251 yr Iperf comes included with Unraid, I would recommend running outside docker, run a single stream test in both directions.
February 21, 20251 yr Author Solution i was sarching 2 days trying all the stuff. my solution so simlpe as f... solution was updating my realteak 2,5 gb driver on my windwos pc. thx for help Reverse mode, remote host 192.168.178.46 is sending [ 5] local 192.168.178.47 port 56914 connected to 192.168.178.46 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 283 MBytes 2.37 Gbits/sec [ 5] 1.00-2.00 sec 283 MBytes 2.37 Gbits/sec [ 5] 2.00-3.00 sec 283 MBytes 2.37 Gbits/sec [ 5] 3.00-4.01 sec 285 MBytes 2.37 Gbits/sec [ 5] 4.01-5.01 sec 284 MBytes 2.37 Gbits/sec [ 5] 5.01-6.00 sec 279 MBytes 2.37 Gbits/sec [ 5] 6.00-7.01 sec 286 MBytes 2.37 Gbits/sec [ 5] 7.01-8.01 sec 282 MBytes 2.37 Gbits/sec [ 5] 8.01-9.01 sec 285 MBytes 2.37 Gbits/sec [ 5] 9.01-10.01 sec 279 MBytes 2.34 Gbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.02 sec 2.77 GBytes 2.37 Gbits/sec 0 sender [ 5] 0.00-10.01 sec 2.76 GBytes 2.37 Gbits/sec receiver Edited February 21, 20251 yr by fromhomeXX
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.