升级7.0.1系统后，Intel Arc A380显卡出现问题，我将A380显卡映射到Emby或者Jellyfin上开启转码，转码率稳定在8fps，7.0.0的时候一切正常，应该不是我的显卡坏了吧？升级7.0.1系统后，Intel Arc A380显卡出现问题，我将A380显卡映射到Emby或者Jellyfin上开启转码，转码率稳定在5fps，7.0.0的时候一切正常，应该不是我的显卡坏了吧？After upgrading to 7.0.1 system, the Intel Arc A380 graphics card does not work properly. When I map the A380 graphics card to Emby or Jellyfin and turn on transcoding, the transcoding rate is around 5fps, while everything is normal with 7.0.0. It shouldn't be just my graphics card that is broken, right?

Edited March 5, 20251 yr by a313403367

My A310 works just fine for me on 7.0.1

4 hours ago, MowMdown said:

我的 A310 在 7.0.1 上运行良好

But when I changed the system to 7.0.0, everything returned to normal.

At least it's not the graphics card that's broken.

10 minutes ago, a313403367 said:

但当我把系统改成7.0.0的时候，一切都恢复正常了。

At least it's not the graphics card that's broken.

你好，请问你的unraid版本是哪个？Intel Arc A380 我记得需要xe驱动吧，只有7.0beta2版本才能用

我是dg1，更换社区版内核等都搞了，不太行，emby不识别

2 hours ago, XINJIAWEI said:

我是dg1，更换社区版内核等都搞了，不太行，emby不识别

我现在是7.0.0

26 minutes ago, a313403367 said:

我现在是7.0.0

手动更换过内核吗？