I updated from 6.12.10 to 7.0.1 tonight. 

 

When the server booted the connected monitor told me i got a ip adress that is the normal one that i have on my server. 

But no GUI when accessing it from my laptop or my phone. i had SSH during this time. 

 

I tried to restart with GUi in the bootmenu and i got the same thing there. no connection on the connected montor. 

 

With No plugins and GUI i atlest got the GUi on my connected monitor. But no connection with the laptop. (this might not be ment to work i dont know)

 

I tried to remove the ident.cfg. notwork.cfg and machine-id. and that did not work. i have tired to remove the tower.pem file aswell. 

 

Any ideas?

tower-diagnostics-20250312-2012.zip

Do you have a current flash backup?

Yes and i tried to add it to a another usb to keep the USB as to look at. Now i cant replace the Key on that drive. FML  

The config folder from your flash backup is all you need to get going again with all of your configuration on a new install.

6 hours ago, trurl said:

The config folder from your flash backup is all you need to get going again with all of your configuration on a new install.

So what you mean is that i should make a new unraid 7 usb and move the config folder from the backup onto it? And that might work? 

 

Since all the plugins ,configs so on is in the config folder and i suspect that i will have the same problem. I think that it is a plugin or a setting that breaks the gui but i cant find anything in the logs. 

 

But my log reading skills arent the best. 

You can try redoing the flash drive, backup the current one first and then recreate it using the USB tool and just restore the bare minimum, like the key, super.dat and the pools folder for the assignments, also copy the docker user templates folder (\config\plugins\dockerMan\templates-user), if all works you can then reconfigure the server or try restoring a few config files at a time from the backup to see if you can find the culprit.    

I tried to redo the USB as you suggested and it worked.

I have some work ahead of me to re add all of the dockers and so on.

 

When i started adding plugins i got the same problem.

I found this in the logs. i found an old post where you told the user that it might be the connect plugin. but i dont have the installed. I know that this is a wide question and you might not have the answer but i have to ask.

Mar 15 22:32:00 Tower avahi-daemon[5741]: Registering new address record for 192.168.10.197 on br0.IPv4.
Mar 15 22:32:00 Tower rc.avahidaemon: Avahi mDNS/DNS-SD daemon...  Started.
Mar 15 22:32:00 Tower rc.samba: Updating Samba server daemon...
Mar 15 22:32:00 Tower rc.samba: Restarting Samba server daemon...
Mar 15 22:32:00 Tower rc.samba: Stopping Samba server daemon...
Mar 15 22:32:00 Tower nginx: 2025/03/15 22:31:55 [emerg] 4060#4060: bind() to 100.71.X.XX:443 failed (98: Address already in use)
Mar 15 22:32:00 Tower nginx: 2025/03/15 22:31:55 [emerg] 4060#4060: bind() to [fd7a:115c:a1e0::XXX::XXX]:443 failed (98: Address already in use)
Mar 15 22:32:00 Tower rc.samba: killall --ns 5747 smbd nmbd wsdd2 winbindd
Mar 15 22:32:00 Tower wsdd2[2264]: 'Terminated' signal received.
Mar 15 22:32:00 Tower winbindd[2268]: [2025/03/15 22:32:00.489958,  0, traceid=1] ../../source3/winbindd/winbindd_dual.c:1980(winbindd_sig_term_handler)
Mar 15 22:32:00 Tower winbindd[2268]:   Got sig[15] terminate (is_parent=1)
Mar 15 22:32:00 Tower wsdd2[2264]: terminating.
Mar 15 22:32:00 Tower avahi-daemon[5741]: Server startup complete. Host name is Tower.local. Local service cookie is 3674673326.
Mar 15 22:32:00 Tower nginx: 2025/03/15 22:31:55 [emerg] 4060#4060: bind() to 100.71.XX.XX:443 failed (98: Address already in use)
Mar 15 22:32:00 Tower nginx: 2025/03/15 22:31:55 [emerg] 4060#4060: bind() to [fd7a:115c:a1e0::XXX::XXX]:443 failed (98: Address already in use)
Mar 15 22:32:00 Tower rc.samba: Samba server daemon...  Stopped.
Mar 15 22:32:00 Tower rc.samba: Starting Samba server daemon...
Mar 15 22:32:01 Tower rc.samba: /usr/sbin/smbd -D
Mar 15 22:32:01 Tower rc.samba: /usr/sbin/wsdd2 -d -4 -6
Mar 15 22:32:01 Tower wsdd2[5825]: starting.
Mar 15 22:32:01 Tower rc.samba: /usr/sbin/winbindd -D
Mar 15 22:32:01 Tower rc.samba: Samba server daemon...  Started.
Mar 15 22:32:01 Tower nginx: 2025/03/15 22:31:55 [emerg] 4060#4060: bind() to 100.71.XX.XX:443 failed (98: Address already in use)
Mar 15 22:32:01 Tower nginx: 2025/03/15 22:31:55 [emerg] 4060#4060: bind() to [fd7a:115c:a1e0::XXX:XXX]:443 failed (98: Address already in use)
Mar 15 22:32:01 Tower ool www[5241]: /usr/local/emhttp/plugins/dynamix/scripts/emcmd 'cmdStatus=Apply'
Mar 15 22:32:01 Tower emhttpd: Starting services...

 

This repeats almost the same for a while.

 

 

And later in the log i get this. And i get the feeling that is when the GUI stops working.

Mar 15 22:33:26 Tower publish: curl to update2 failed
Mar 15 22:33:26 Tower publish: curl to update3 failed
Mar 15 22:33:26 Tower publish: curl to filemanager failed
Mar 15 22:33:27 Tower publish: curl to devices failed
Mar 15 22:33:27 Tower publish: curl to arraymonitor failed
Mar 15 22:33:27 Tower publish: curl to filemonitor failed
Mar 15 22:33:27 Tower publish: curl to filemanager failed

 

 

I can send you @JorgeB but i did not manage to anonymize it so i dont want to post it. if you have the time to look at them.

 

The last plugins i installed was:

Dynamix System Temp

Gpu Statistics

Tailscale

Community apps

Intel GPU Top

 

3 hours ago, Dinez said:

have some work ahead of me to re add all of the dockers and so on

You can normally minimise the effort by using Apps->Previous Apps to reinstall containers using their old settings.

3 hours ago, Dinez said:

When i started adding plugins i got the same problem.

Try adding them one at time and retesting, little of a pain, but it should work to find the culprit.

I wanted to say that i updated again and i got it to work.

I had a Tailscale funnel active and with 7.1.4 i got an error that tailscale tried to use 443 for the funnel. So that must have been the problem this whole time.

Thanks for the help anyway.