March 13, 20251 yr Hello, I'm trying to recover from a backup and transferring data back to my server. However, in the middle of copying files over the SMB shares will lockup and I cannot access them via file browser. I can still access the sever via web browser. Any idea what could be the cause? I am using a Ryzen 7950x if that helps. (I did change power control to typical) fileserver-diagnostics-20250313-0713.zip Edited March 13, 20251 yr by impenetrable-aviator2287
March 13, 20251 yr Community Expert Mar 7 09:41:43 Fileserver kernel: usb 2-2: USB disconnect, device number 2 Mar 7 09:41:43 Fileserver kernel: xhci_hcd 0000:14:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state. Mar 7 09:41:43 Fileserver kernel: sd 14:0:0:0: [sdt] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s Mar 7 09:41:43 Fileserver kernel: sd 14:0:0:0: [sdt] tag#0 CDB: opcode=0x88 88 00 00 00 00 05 2f 35 58 98 00 00 01 00 00 00 Mar 7 09:41:43 Fileserver kernel: I/O error, dev sdt, sector 22266861720 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 2 Mar 7 09:41:43 Fileserver kernel: sd 14:0:0:0: [sdt] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s Mar 7 09:41:43 Fileserver kernel: sd 14:0:0:0: [sdt] tag#0 CDB: opcode=0x88 88 00 00 00 00 05 2f 35 59 98 00 00 01 00 00 00 Mar 7 09:41:43 Fileserver kernel: I/O error, dev sdt, sector 22266861976 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 2 Mar 7 09:41:43 Fileserver kernel: device offline error, dev sdt, sector 22266861720 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Mar 7 09:41:43 Fileserver kernel: Buffer I/O error on dev sdt1, logical block 2783357459, async page read Mar 7 09:41:43 Fileserver kernel: device offline error, dev sdt, sector 22266861720 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Mar 7 09:41:43 Fileserver kernel: Buffer I/O error on dev sdt1, logical block 2783357459, async page read Mar 7 09:41:43 Fileserver ntfs-3g[3339075]: ntfs_attr_pread error reading '/Media/Videos/Movies/4k BluRays/Captain America (2011)/Captain America (2011).mkv' at offset 3272605696: 131072 <> 61440: Input/output error I assume you are transferring from this unassigned device? If yes, it dropped offline. Also a lot of log spam like this: Mar 5 16:00:04 Fileserver nginx: 2025/03/05 16:00:04 [error] 14826#14826: *126681 limiting requests, excess: 20.417 by zone "authlimit", client: 192.168.5.135, server: ,request: "PROPFIND /login HTTP/1.1", host: "192.168.5.10" This client: 192.168.5.135 should be the problem
March 13, 20251 yr Author I'm actually trying to transfer over the network. And I fixed the authlimit. I had a stale gui open on another box. What'll happen is I get up to 1.7Gbps transfer rate then after about 10 files it'll drop to nothing and I can't access any of my shares on any array at all. Funny thing is, if I copy from the share I'll get full 2.5Gbps the entire time with no issues. But if I were to copy that same data back the share crashes and all shares are inaccessible. Doesn't matter if it's on a different pool or the array. I can access and browse the shares from the WebUI and drill down into the directories as well. It's just the SMB over the network that just crashes. Edited March 13, 20251 yr by impenetrable-aviator2287
March 13, 20251 yr Community Expert I would recommend rebooting to clear the logs, then post new diags after it happens again.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.