March 17, 20251 yr Hello, I am running into a bit of an issue on a brand new install. I currently have a 1TB m.2 nvme connected directly to the motherboard which is visible by bios, which i intended on using for my Cache drive. And for my data drives there are 2 6TB drives plugged into a Adaptech ASR-71605 HBA. When i login into the Adaptech bios i can see both of the disks, but cant for the life of me get them present in Unraid. Id love if someone could take a look and possibly point me in the right direction? nas-diagnostics-20250316-2054.zip
March 17, 20251 yr Community Expert Solution For the NVMe device: Mar 16 20:50:49 NAS kernel: ahci 0000:00:17.0: Found 1 remapped NVMe devices. Mar 16 20:50:49 NAS kernel: ahci 0000:00:17.0: Switch your BIOS from RAID to AHCI mode to use them. For the disks, the controller is bound to vfio-pci, delete /config/vfio-pci.cfg on the flash drive and reboot, but I believe that is a RAID controller, so possibly not ideal.
March 19, 20251 yr Author @JorgeB good evening, i found out the card was in RAID mode instead of HBA mode, so i switched it over to HBA mode (but still no luck) Let me delete the vfio-pci cfg as well and see if that resolves the issue.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.