Don't you love when things go horribly sideways? Went through steps to enable VFIO on my Unraid homelab server to try to experiment with GPU passthrough of an old Radeon Pro WX3100, system has onboard video and using it (Gigabyte server motherboard BIOS already set to onboard device not external or PCIe, setting was unchanged). I enabled VFIO, toggling the devices in IOMMU settings for the card and its audio device, then rebooted... now she won't boot back into webui, ssh, smb service fails to start. 

I have since tried renaming the VFIO-pci.cfg file and rebooting, and even tried backing up and re-imaging USB (then dropping license and config folder back), and removing the GPU physically from the system. Any guidance on what linger bit of the config change may be left that could be causing the problem?  

Running: Unraid v7.0.1 w/ patch 20250128204439-pr271
 

thetinyvoid-diagnostics-20250324-0934.zip

Edited March 30, 20251 yr by Dawthus
Adding unraid ver

Edit /boot/config.domain.cfg on the flash drive and change SERVICE="enable" to "disable", then boot again to see if it boots correctly.

Thanks, was able to fix it after going through every setting. Turned out it was the ssl cert, it was corrupt and not readable, why it wasn’t throwing an error related to ssl and why a bunch of other things were wonky (SMB, SSH, some dockers but not all) is odd.