April 1, 20251 yr got a parity drive that is disabled. I have 2 so still good so far. Looking at attributes the only line that is brown (highlighted) is UDMA CRC error count. This is normally a cable issue. So I power down, swap cables. Take the array offline and remove the drive. Start array, Then stop the array again and add the parity drive back in. It says it will erase all data on the drive which is expected. I start the array and that drive is immediately disabled again. Is there any additional deducing I can do to try and see what the problem is?
April 2, 20251 yr Author what do you mean diagnostics? I pulled it out of its drive caddy thinking that the caddy might be the problem. So far it's working ok and a parity sync is happening. Once the parity sync finishes, I'm going to try it in a different slot in the caddy to see if that slot was the problem. Stay tuned!
April 2, 20251 yr Community Expert 54 minutes ago, rykr said: what do you mean diagnostics? If you want help with this, we need the diagnostics: 22 hours ago, rykr said: Is there any additional deducing I can do to try and see what the problem is?
April 2, 20251 yr Author vault-diagnostics-20250402-1355.zipHere are the diags. Not sure it will show anything as it's rebuilding parity now.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.