April 27, 201214 yr Hi everyone! UNRAID Version 4.7 - syslog attached. Old parity drive is a 2TB WD Green - all is ok with parity drive and UNRAID server. Wish to install 3TB WD Black (wd 30ezrx) as parity drive. Followed instuctions here to replace parity drive: http://lime-technology.com/wiki/index.php?title=UnRAID_Manual#Replace_a_single_disk_with_a_bigger_one When you go to DEVICES - I can assign the drive to the parity shows this: pci-000:01:00.0-scsi-1:0:0:0 host2 (sda) WDC_WD30EZRX-00MMMB0_WD-WCAWZ1282289 However when you go to Main it shows NOT INSTALLED. Pressing start brings the array up with no protection. What am I missing? Thanks in advance. syslog.txt
April 28, 201214 yr v. 4.7 does not support drives bigger than about 2.2 T. You need to resize the disk or move to v. 5.
April 28, 201214 yr What am I missing? 4.7 doesn't support 3TB drives... Beta Support for 3T Drives in 5.0-beta8 or later.
April 28, 201214 yr Author Thanks folks. Appreciate the quick response. Shall wait for the release - I am a nervous Nelly.
April 28, 201214 yr I have been running beta14 since it has been released and its solid as a rock, had almost 98 days of uptime before i restarted.
April 28, 201214 yr Author It is tempting to up to v5.14 I got this 3TB when I did a warranty for a 2TB got lucky. On the flip side with so much data now on the line (over 10TB) and not as much time to spare I am reluctant. Shall read up on v5. Thanks again.
Archived
This topic is now archived and is closed to further replies.