April 21, 20251 yr Running Unraid 6.12.14 Been having system stability issues related to power supply or raid controller. I think I solved the stability issues but now trying to run a Parity-Check with "Write corrections to parity" unselected so that I can asses if any drives have issues before committing to changes. This will also give me a chance to lightly stress test the system to validate the stability issues are resolved before changing data. I already know I have to replace and rebuild Disk6 from parity so I excluded it from the parity test by leaving the HDD unassigned. When I started the Parity-Check it immediately listed "Sync errors corrected: 1" which I did not expect given that "Write corrections to parity" was unselected so I paused the check. Wondering if anyone has had a similar experience or recommendations on how to proceed? Below are the options I'm considering. 1.) Just let it run and assume the "Sync errors corrected" was related to running a Parity-Check with a disk missing. 2.) Stop Parity-Check and rerun in Maintenance Mode to try and force it to avoid writing. 3.) I could also scrap the Parity-Check and prioritize rebuilding the missing disk while monitoring to make sure connection issues were resolved. Thanks for the help!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.