April 25, 20251 yr At some point when my whole system fell apart, my cache drives stopped working properly. In the Main tab cache 2 shows as a 'New Device'. Should be noted cache2 (I'm pretty sure) is the one I have on a M.2 PCIE adapter, but had been working fine up to now. serenity-diagnostics-20250424-2000.zip
April 25, 20251 yr Author Label: none uuid: d30610f5-bb56-437b-b870-cf53e2adabca Total devices 1 FS bytes used 10.07GiB devid 1 size 50.00GiB used 12.52GiB path /dev/loop2 Label: none uuid: 8f35a871-0b1d-46f1-bd0f-32f2bb7fed02 Total devices 1 FS bytes used 1.11MiB devid 1 size 1.00GiB used 126.38MiB path /dev/loop3 Label: none uuid: 76f2fd8c-79fe-4384-a1fd-498ff2aac775 Total devices 2 FS bytes used 144.00KiB devid 1 size 465.76GiB used 2.01GiB path /dev/nvme0n1p1 devid 2 size 465.76GiB used 2.01GiB path /dev/nvme1n1p1
April 25, 20251 yr Community Expert Solution Reimport the pool with both devices: on main click on the first device for that pool and then "remove pool" back on main, create a new pool with the same name and 2 slots assign the pool devices, leave the filesystem set to auto start the array to import the pool Any issues mounting the pool after that, post new diags
April 25, 20251 yr Author That seems to have fixed it, both devices appear as part of the pool. Thanks! Edited April 25, 20251 yr by tmayoff
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.