April 25, 20251 yr Problem: I was trying to get my disk to spin down when I encountered a read error. I found this on the forum and since I run Seagate IronWolf Disk I followed the steps. I did not reboot since I was already running a parity check to try to remove the read errors. Then just 30 minutes ago, my server went into an unclean shutdown while doing a parity check. This has not happened for a while. I'm not seeing anything weird, but I'm a bit worried. Could someone advise me if there is something really wrong and where I should look? The server is now again doing a Parity-Check caused by the unclean shutdown. Basic information: I'm currently at 7.0.1. I have some plugins loaded (but I'm not thinking these could be the issue). I have a full syslog file (it syncs to my backup Synology) if this could be handy? Hardware: M/B:Micro-Star International Co., Ltd. PRO B760M-A WIFI (MS-7D99) Version 2.0 s/n 07D9921_NC1B603670 BIOS:American Megatrends International, LLC. Version A.B0 Dated 09/29/2024 CPU:Intel® Core™ i5-14500 @ 2574 MHz HVM:Enabled IOMMU:Enabled Cache:L1 Cache: 288 KiB, L1 Cache: 192 KiB, L2 Cache: 7680 KiB, L3 Cache: 24 MiB, L1 Cache: 256 KiB, L1 Cache: 512 KiB, L2 Cache: 4 MiB, L3 Cache: 24 MiB Memory:64 GiB DDR5 (max. installable capacity 128 GiB) Network:eth0: 1000 Mbps, full duplex, mtu 1500 Kernel:Linux 6.6.78-Unraid x86_64 Serial Attached SCSI controller: Broadcom / LSI SAS3008 PCI-Express Fusion-MPT SAS-3 (rev 02) Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05) homelabserver-diagnostics-20250425-0346.zip
April 25, 20251 yr Community Expert 2 minutes ago, Soulplayer said: have a full syslog file (it syncs to my backup Synology) if this could be handy? zip and post it
April 25, 20251 yr Author I do not think so. This is how the export function works on my synology. I'm not finding anything on google
April 25, 20251 yr Community Expert Too much trouble to work with. Setup syslog server to receive the syslog to a user share folder on localhost.
April 25, 20251 yr Author Okay I set this up. Thank you for the tip. Sorry I cannot convert it to a .log file.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.