I swear I had this working in the past... I'm positive at one point Plex was using hardware transcode just fine and now it seems nothing can use it.

 

Relevant specs/info:

Intel i9-12900KS

Unraid 7.0.1

Intel-GPU-TOP app installed

Relevant containers have `--device=/dev/dri:/dev/dri` as extra params

 

I suppose I first noticed with tdarr that QSV wasn't working. That would have been around March 2nd. I didn't think much of it, but now after setting up Jellyfin I really started to look into things. I installed intel-gpu-tools in the Jellyfin container and `intel_gpu_top` would error and not find any GPUs. I then looked in `/dev/dri` and renderD128 is there along with card0. I tried the same thing on the Unraid host and it didn't work. I even tried modprobe i915:
 

root@Kerbol-Next:~# modprobe i915
root@Kerbol-Next:~# intel_gpu_top
No device filter specified and no discrete/integrated i915 devices found
root@Kerbol-Next:~# ls /dev/dri
by-path/  card0  renderD128

 

I'm not sure what else to look for and test?

kerbol-next-diagnostics-20250508-0930.zip

Edited May 8, 20251 yr by FlexibleToast

upgrade to latest v7.1 and test intel arc driver issues have been fixed in latest 6.12 lts kernel

 

On 5/9/2025 at 11:39 AM, bmartino1 said:

upgrade to latest v7.1 and test intel arc driver issues have been fixed in latest 6.12 lts kernel

 

It's weird that I didn't get the notifications for updates. I'm on v7.1.2 now and it still doesn't work.

1 hour ago, FlexibleToast said:

It's weird that I didn't get the notifications for updates. I'm on v7.1.2 now and it still doesn't work.

??? diag doesn't show everything... What do you mean the igpu doesn't work what are you trying to do?

Do you have another graphics card installed?

what's the output of lspci? This may be a bios dual graphic issue where you need to tell bios to have and use both cards.

as your getting a g-card:

root@Kerbol-Next:~# ls /dev/dri
by-path/  card0  renderD128