My Disk 9 has a small x next to it and says "Device is Disabled"

I have attached diagnostics, I am not sure how to proceed, if I need to replace the drive or if I can rebuild onto this same disk, or some other action please?

tower-diagnostics-20250514-1204.zip

Disk was already disabled at boot, so we can't see what happened, but SMART looks fine, so most likely a power/connection issue, check/replace the cables, and if the emulated disk is still mounting and contents look correct, you can rebuild on top:

 

https://docs.unraid.net/unraid-os/manual/storage-management#rebuilding-a-drive-onto-itself

Will do thanks!

I replaced the SATA cable, and followed the instructions and successfully rebuilt onto the same drive, but it still shows the red x and indicates Drive is Disabled.

 

I have attached new diagnostics, do I need to replace the drive or do something different?

tower-diagnostics-20250516-0830.zip

26 minutes ago, Glimmerman911 said:

and successfully rebuilt onto the same drive

It wasn't successful:

 

May 14 12:48:57 Tower kernel: md: disk9 write error, sector=104310344
May 14 12:48:57 Tower kernel: md: disk9 write error, sector=104310352
May 14 12:48:57 Tower kernel: md: disk9 write error, sector=104310360
May 14 12:48:57 Tower kernel: ata9: limiting SATA link speed to 1.5 Gbps
May 14 12:48:57 Tower kernel: sd 10:0:0:0: [sdh] Synchronizing SCSI cache
May 14 12:48:58 Tower kernel: md: recovery thread: exit status: -4

 

Did you also replace the power cable?

I will replace the power cable and try rebuilding again.

I replace the power cable and rebuilt, success, thank you!