I am having a few issues with some of my docker containers after upgrading unraid from 7.0.1 to 7.1.2. and am looking for help.

 

Things that were broken but are now fixed:

I have both sabnzbd and qbittorrentvpn installed. both want to use port 8080 so I moved sabnzbd to port 8081, that worked fine before the upgrade but would not load the web interface after the upgrade. I found I had to change the WebUI to http://[IP]:[PORT:8081] in the advanced setting not just in the docker container port type variable. It did work before, but not after until the change in the advance setting.

 

This was 1/2 of the problem with the qbittorrentvpn problem. that container would still not load the web interface if the VPN was turned on. the only way I could fix that was to delete the VPN configuration and reconfigure it. After thatthe webUI would load fine with the VPN enabled.  

 

Now to the 2 containers I have not fully fixed yet:

both audiobookshelf and komga have tailscale installed so they can be accessed outside my network but only by devices on my tail net. This all works fine. I can still access them both inside my network and out via the taiscale url. But I can no longer access those 2 containers via the internal webUI link that is the {unraidserverIP}:{container port}.

 

All docker containers that do not have tailscale install still work from the internalIP:port but the 2 ones using tailscale will not. 

 

I can access the containers so it is not a critical issue but something changed as I was able to access it that way before the update. I always get concerned when there is a change to the server that I do not understand so I would like to restore the internal connection or at least understand why it stopped working.

 

thanks for any help,

Andrew

 

I have installed another container that I use tailscales with, calibre-web. It is behaving the same way. I can access it via the tailscaleIP:Port or thr tailscale url,  but not the unraid provided webui links which is serverIP:port. 

All the docker containers that do not use tailscale work with the webui link.

This started after I upgrades unraid to 7.1.2. So not sure if it a tailscale support issue or upgrade support but it would be great to figure out what changed so I am not surprised down the road when/if some other function is disrupted. 

 

Thanks for any help

Andrew