May 6, 201214 yr One of my ide drives recently filled to 100% due to split level 2 filling the drive beyond its minimum free setting (with current TV series). Due to this the cache drive stopped moving the files automatically. I have since freed up space greater than the minimum free setting and manually moved the files from the cache drive. New files downloaded to the cache drive continue to have mover/duplicate file errors. See attached log. Not sure what to do at this point. Thanks in advance syslog-2012-05-06.txt
May 6, 201214 yr Author I have removed the duplicates. When you say turn on the disk shares do you mean enable user shares? This is already enabled. After removing the duplicates I ran the mover again. This generated more errors. Thoughts? Thanks May 6 15:35:36 Tower logger: mover started May 6 15:35:36 Tower logger: skipping Library/ May 6 15:35:36 Tower logger: moving Network Trash Folder/ May 6 15:35:36 Tower logger: ./Network Trash Folder/.AppleDouble/.Parent May 6 15:35:36 Tower logger: rsync: get_xattr_data: lgetxattr(".","user.org.netatalk.supports-eas.nGdcLo",0) failed: Exec format error ( (Errors) May 6 15:35:36 Tower logger: .d..t...... Network Trash Folder/ May 6 15:35:36 Tower logger: >f......... Network Trash Folder/.AppleDouble/.Parent May 6 15:35:36 Tower logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] (Errors) May 6 15:35:36 Tower logger: moving TV/ May 6 15:35:36 Tower logger: ./TV/The Office (US)/Season 08/metadata/The Office (US) - 8x23 - Turf War.jpg May 6 15:35:36 Tower logger: rsync: get_xattr_data: lgetxattr(".","user.org.netatalk.supports-eas.nGdcLo",0) failed: Exec format error ( (Errors) May 6 15:35:36 Tower logger: .d..t.....x TV/ May 6 15:35:36 Tower logger: >f......... TV/The Office (US)/Season 08/metadata/The Office (US) - 8x23 - Turf War.jpg May 6 15:35:36 Tower logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] (Errors) May 6 15:35:36 Tower logger: ./TV/The Office (US)/Season 08/metadata/The Office (US) - 8x23 - Turf War.xml May 6 15:35:36 Tower logger: rsync: get_xattr_data: lgetxattr(".","user.org.netatalk.supports-eas.nGdcLo",0) failed: Exec format error ( (Errors) May 6 15:35:36 Tower logger: .d........x TV/ May 6 15:35:36 Tower logger: >f......... TV/The Office (US)/Season 08/metadata/The Office (US) - 8x23 - Turf War.xml May 6 15:35:36 Tower logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] (Errors) May 6 15:35:36 Tower logger: ./TV/Grand Designs Australia/Season 02/metadata/Grand Designs Australia - 2x05 - Trinity Beach Pole House.jpg May 6 15:35:36 Tower logger: rsync: get_xattr_data: lgetxattr(".","user.org.netatalk.supports-eas.nGdcLo",0) failed: Exec format error ( (Errors) May 6 15:35:36 Tower logger: .d........x TV/ May 6 15:35:36 Tower logger: .d..t...... TV/Grand Designs Australia/ May 6 15:35:36 Tower logger: >f......... TV/Grand Designs Australia/Season 02/metadata/Grand Designs Australia - 2x05 - Trinity Beach Pole House.jpg May 6 15:35:37 Tower logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] (Errors) May 6 15:35:37 Tower logger: ./TV/Grand Designs Australia/Season 02/metadata/Grand Designs Australia - 2x05 - Trinity Beach Pole House.xml May 6 15:35:37 Tower logger: rsync: get_xattr_data: lgetxattr(".","user.org.netatalk.supports-eas.nGdcLo",0) failed: Exec format error ( (Errors) May 6 15:35:37 Tower logger: .d........x TV/ May 6 15:35:37 Tower logger: .d..t...... TV/Grand Designs Australia/ May 6 15:35:37 Tower logger: >f......... TV/Grand Designs Australia/Season 02/metadata/Grand Designs Australia - 2x05 - Trinity Beach Pole House.xml May 6 15:35:37 Tower logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] (Errors) May 6 15:35:37 Tower logger: ./TV/Grand Designs Australia/Season 02/metadata/Thumbs.db May 6 15:35:37 Tower logger: rsync: get_xattr_data: lgetxattr(".","user.org.netatalk.supports-eas.nGdcLo",0) failed: Exec format error ( (Errors) May 6 15:35:37 Tower logger: .d........x TV/ May 6 15:35:37 Tower logger: .d..t...... TV/Grand Designs Australia/ May 6 15:35:37 Tower logger: >f......... TV/Grand Designs Australia/Season 02/metadata/Thumbs.db May 6 15:35:37 Tower logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] (Errors) May 6 15:35:37 Tower logger: ./TV/Grand Designs Australia/Season 02/Grand Designs Australia - 2x05 - Trinity Beach Pole House.avi May 6 15:35:37 Tower logger: rsync: get_xattr_data: lgetxattr(".","user.org.netatalk.supports-eas.nGdcLo",0) failed: Exec format error ( (Errors) May 6 15:35:37 Tower logger: .d........x TV/ May 6 15:35:37 Tower logger: .d..t...... TV/Grand Designs Australia/ May 6 15:35:37 Tower logger: >f......... TV/Grand Designs Australia/Season 02/Grand Designs Australia - 2x05 - Trinity Beach Pole House.avi May 6 15:35:52 Tower logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] (Errors) May 6 15:35:52 Tower logger: mover finished
May 6, 201214 yr No. Enabling disk shares would have made it easier to remove the duplicates. But you removed them so never mind. Upgrade to rc2 and see if the errors stop.
May 7, 201214 yr Author OK upgraded to RC2. Still getting Mover errors, in addition to a continuing notice in the syslog regarding scsi_verify_blk_ioctl: 32 callbacks suppressed (Drive related) and hdparm: sending ioctl 2285 to a partition! (see below). This appears in the log every minute or so. I will attach the full syslog. May 6 19:44:41 Tower logger: mover started May 6 19:44:41 Tower logger: skipping Library/ May 6 19:44:41 Tower logger: moving TV/ May 6 19:44:41 Tower logger: ./TV/GCB/Season 01/metadata/GCB - 1x10 - Revelation.jpg May 6 19:44:41 Tower logger: rsync: get_xattr_data: lgetxattr(".","user.org.netatalk.supports-eas.nGdcLo",0) failed: Exec format error ( (Errors) May 6 19:44:41 Tower logger: .d........x TV/ May 6 19:44:41 Tower logger: >f......... TV/GCB/Season 01/metadata/GCB - 1x10 - Revelation.jpg May 6 19:44:42 Tower logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] (Errors) May 6 19:44:42 Tower logger: ./TV/GCB/Season 01/metadata/GCB - 1x10 - Revelation.xml May 6 19:44:42 Tower logger: rsync: get_xattr_data: lgetxattr(".","user.org.netatalk.supports-eas.nGdcLo",0) failed: Exec format error ( (Errors) May 6 19:44:42 Tower logger: .d........x TV/ May 6 19:44:42 Tower logger: >f......... TV/GCB/Season 01/metadata/GCB - 1x10 - Revelation.xml May 6 19:44:42 Tower logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] (Errors) May 6 19:44:42 Tower logger: ./TV/GCB/Season 01/GCB - 1x10 - Revelation.mkv May 6 19:44:42 Tower logger: rsync: get_xattr_data: lgetxattr(".","user.org.netatalk.supports-eas.nGdcLo",0) failed: Exec format error ( (Errors) May 6 19:44:42 Tower logger: .d........x TV/ May 6 19:44:42 Tower logger: >f......... TV/GCB/Season 01/GCB - 1x10 - Revelation.mkv May 6 19:44:55 Tower kernel: scsi_verify_blk_ioctl: 36 callbacks suppressed (Drive related) May 6 19:44:55 Tower kernel: hdparm: sending ioctl 2285 to a partition! May 6 19:45:01 Tower last message repeated 5 times May 6 19:45:01 Tower kernel: smartctl: sending ioctl 2285 to a partition! May 6 19:45:01 Tower last message repeated 7 times May 6 19:45:36 Tower logger: rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1042) [sender=3.0.7] (Errors) May 6 19:45:36 Tower logger: mover finished May 6 19:46:02 Tower kernel: scsi_verify_blk_ioctl: 32 callbacks suppressed (Drive related) May 6 19:46:02 Tower kernel: hdparm: sending ioctl 2285 to a partition! May 6 19:46:05 Tower last message repeated 5 times May 6 19:46:05 Tower kernel: smartctl: sending ioctl 2285 to a partition! May 6 19:46:05 Tower last message repeated 3 times May 6 19:47:05 Tower kernel: scsi_verify_blk_ioctl: 36 callbacks suppressed (Drive related) May 6 19:47:05 Tower kernel: hdparm: sending ioctl 2285 to a partition! May 6 19:47:08 Tower last message repeated 5 times May 6 19:47:08 Tower kernel: smartctl: sending ioctl 2285 to a partition! May 6 19:47:08 Tower last message repeated 3 times May 6 19:48:09 Tower kernel: scsi_verify_blk_ioctl: 36 callbacks suppressed (Drive related) May 6 19:48:09 Tower kernel: hdparm: sending ioctl 2285 to a partition! May 6 19:48:11 Tower last message repeated 5 times May 6 19:48:11 Tower kernel: smartctl: sending ioctl 2285 to a partition! syslog-2012-05-061.txt
May 10, 201214 yr Author I am still having errors with the Mover and I am currently having to move files manually. I would prefer to have the system work as designed. Should I move this request for assistance to the General Support section or does anyone have any advice on how best to deal with this issue. Thanks
May 10, 201214 yr Author the following notification in the syslog was stopped by uninstalling the email feature in Simple Features. Tower kernel: hdparm: sending ioctl 2285 to a partition! This has nothing to do with the Mover or duplicate file errors.
May 10, 201214 yr the following notification in the syslog was stopped by uninstalling the email feature in Simple Features. Tower kernel: hdparm: sending ioctl 2285 to a partition! This has nothing to do with the Mover or duplicate file errors. This is a known issue with simpleFeatures. The creator has plans to re-work the email feature.
May 10, 201214 yr Before you contact Lime-tech disable all add-ons. Backup the go file and replace with a stock go file or make all additional lines in the go file comments (add #).
Archived
This topic is now archived and is closed to further replies.