Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Unraid Server kein Internet wenn Docker aktiviert

Featured Replies

Hallo zusammen,

ich habe ein Problem und komme nicht weiter. Von einem Tag auf den anderen hatte von Unraid keine Verbindung ins Internet. Im lokalen Netzwerk funzt alles bestens. Ich habe schon ein bisschen gesucht und mitbekommen, sobald Docker aktiviert ist, dann bricht die Verbindung ab.

In den Netzwerkeinstellungen mit Docker sehen wie folgt aus.

unraid_routing_kein_Inet.png

Lösche ich die erste Zeile und gebe sie neu ein, dann wird aus dem br0 -> shim-br0 und das Internet funktioniert auch mit Docker.unraid_routing_inet.png

Wenn ich dann neustarte ist alles wieder im Ursprungszustand und ich habe keine Verbindung.

Die /boot/config/network.cfg hatte ich bei der vorherigen Fehlersuche schon gelöscht.

Wie kann ich das Routing festschreiben und warum blockiert die Dockerbridge (shim-br0) das normale Netzwerk(br0)

Vielen Dank schonmal für Eure Hilfe

Edited by Harry2000

Solved by warp760

Guten Morgen zusammen!

Ich habe seit ein paar Tagen – gefühlt seit dem Update auf 7.1.3 – immer wieder ähnliche Probleme mit meinem Unraid-Server:


Die Internetverbindung bricht in unregelmäßigen Abständen ab, zuletzt gestern gegen 14 Uhr und heute Morgen um 4:50 Uhr.

Besonders ärgerlich ist, dass ich den Server nur mit einem Neustart wieder ins Netz bekomme.

An meiner Netzwerkumgebung oder am Server selbst habe ich nichts verändert. Der Server lief vorher gute fünf Monate ohne jegliche Probleme.

Ich nutze den Ethernet-Port meines ASRock N100M Mainboards, welcher den Realtek RTL8111H Chip verwendet.

Hat jemand vielleicht eine Idee oder ähnliche Erfahrungen gemacht? Ich freue mich über jede Hilfe!

Hier mal der Log meines Servers, vielleicht kann jemand damit mehr anfangen als ich.

Jun 10 04:50:56 ExecutorNode kernel: r8169 0000:01:00.0 eth0: Link is Down

Jun 10 04:50:56 ExecutorNode kernel: bond0: (slave eth0): link status definitely down, disabling slave

Jun 10 04:50:56 ExecutorNode kernel: r8169 0000:01:00.0 eth0: left promiscuous mode

Jun 10 04:50:56 ExecutorNode kernel: r8169 0000:01:00.0 eth0: left allmulticast mode

Jun 10 04:50:56 ExecutorNode kernel: bond0: now running without any active interface!

Jun 10 04:50:56 ExecutorNode kernel: br0: port 1(bond0) entered disabled state

Jun 10 04:50:59 ExecutorNode ntpd[1731]: Deleting 1 br0, [192.168.178.111]:123, stats: received=91, sent=91, dropped=0, active_time=33899 secs

Jun 10 04:50:59 ExecutorNode ntpd[1731]: 216.239.35.0 local addr 192.168.178.111 -> <null>

Jun 10 04:51:02 ExecutorNode kernel: r8169 0000:01:00.0 eth0: Link is Up - 1Gbps/Full - flow control off

Jun 10 04:51:02 ExecutorNode kernel: bond0: (slave eth0): link status definitely up, 1000 Mbps full duplex

Jun 10 04:51:02 ExecutorNode kernel: bond0: (slave eth0): making interface the new active one

Jun 10 04:51:02 ExecutorNode kernel: r8169 0000:01:00.0 eth0: entered promiscuous mode

Jun 10 04:51:02 ExecutorNode kernel: r8169 0000:01:00.0 eth0: entered allmulticast mode

Jun 10 04:51:02 ExecutorNode kernel: bond0: active interface up!

Jun 10 04:51:02 ExecutorNode kernel: br0: port 1(bond0) entered blocking state

Jun 10 04:51:02 ExecutorNode kernel: br0: port 1(bond0) entered forwarding state

Jun 10 04:51:05 ExecutorNode ntpd[1731]: Listen normally on 2 br0 192.168.178.111:123

Jun 10 04:51:05 ExecutorNode ntpd[1731]: 216.239.35.0 local addr <null> -> 192.168.178.111

Jun 10 04:51:05 ExecutorNode ntpd[1731]: new interface(s) found: waking up resolver

Jun 10 04:51:26 ExecutorNode kernel: r8169 0000:01:00.0 eth0: Link is Down

Jun 10 04:51:26 ExecutorNode kernel: bond0: (slave eth0): link status definitely down, disabling slave

Jun 10 04:51:26 ExecutorNode kernel: r8169 0000:01:00.0 eth0: left promiscuous mode

Jun 10 04:51:26 ExecutorNode kernel: r8169 0000:01:00.0 eth0: left allmulticast mode

Jun 10 04:51:26 ExecutorNode kernel: bond0: now running without any active interface!

Jun 10 04:51:26 ExecutorNode kernel: br0: port 1(bond0) entered disabled state

Jun 10 04:51:29 ExecutorNode ntpd[1731]: Deleting 2 br0, [192.168.178.111]:123, stats: received=0, sent=1, dropped=0, active_time=24 secs

Jun 10 04:51:29 ExecutorNode ntpd[1731]: 216.239.35.0 local addr 192.168.178.111 -> <null>

Jun 10 04:51:36 ExecutorNode avahi-daemon[12061]: Withdrawing address record for 192.168.178.111 on br0.

Jun 10 04:51:36 ExecutorNode avahi-daemon[12061]: Leaving mDNS multicast group on interface br0.IPv4 with address 192.168.178.111.

Jun 10 04:51:36 ExecutorNode avahi-daemon[12061]: Interface br0.IPv4 no longer relevant for mDNS.

Jun 10 04:51:55 ExecutorNode kernel: r8169 0000:01:00.0 eth0: Link is Down

Jun 10 04:51:59 ExecutorNode kernel: r8169 0000:01:00.0 eth0: Link is Up - 1Gbps/Full - flow control off

Jun 10 04:51:59 ExecutorNode kernel: bond0: (slave eth0): link status definitely up, 1000 Mbps full duplex

Jun 10 04:51:59 ExecutorNode kernel: bond0: (slave eth0): making interface the new active one

Jun 10 04:51:59 ExecutorNode kernel: r8169 0000:01:00.0 eth0: entered promiscuous mode

Jun 10 04:51:59 ExecutorNode kernel: r8169 0000:01:00.0 eth0: entered allmulticast mode

Jun 10 04:51:59 ExecutorNode kernel: bond0: active interface up!

Jun 10 04:51:59 ExecutorNode kernel: br0: port 1(bond0) entered blocking state

Jun 10 04:51:59 ExecutorNode kernel: br0: port 1(bond0) entered forwarding state

Jun 10 04:52:06 ExecutorNode avahi-daemon[12061]: Joining mDNS multicast group on interface br0.IPv4 with address 192.168.178.111.

Jun 10 04:52:06 ExecutorNode avahi-daemon[12061]: New relevant interface br0.IPv4 for mDNS.

Jun 10 04:52:06 ExecutorNode avahi-daemon[12061]: Registering new address record for 192.168.178.111 on br0.IPv4.

Jun 10 04:52:08 ExecutorNode ntpd[1731]: Listen normally on 3 br0 192.168.178.111:123

Jun 10 04:52:08 ExecutorNode ntpd[1731]: new interface(s) found: waking up resolver

Jun 10 04:56:15 ExecutorNode ntpd[1731]: no peer for too long, server running free now

Kann mir bzw. uns hier vielleicht jemand helfen?

Vielen Dank vorab und liebe Grüße!

EDIT: Rollback durchgeführt und alles läuft wieder.

Edited by MRLDKR

  • Solution

10-06-2025_08-46-07.png

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.