June 28, 20251 yr Ive updated the Server from version 7.0.0 to 7.1.4 and after rebooting the Server i couldnt acces the WebUI. So i pluged a monitor into the server but i only get to an login screen and after I login nothing happens ans also the Local Gui does not work and i get an site not found error. Is my Server broken or is it Something else? what are my options and how much is lost in worst case? thanks in advance and ive attached the sylog maybe that helps.syslog.txt Edited June 28, 20251 yr by Zoraria
June 28, 20251 yr Community Expert Check the config/go file on the flash drive looks OK as there is no sign of an attempt to run emhttpd which amongst other things starts the GUI
June 28, 20251 yr Community Expert Do you have a current flash backup? The config folder from your flash backup is all you need to get your configuration going again on a new install of whichever version.
June 28, 20251 yr Author So I only need to copy the config file and install a new version on the stick and put it back in?
June 28, 20251 yr Author 5 hours ago, itimpi said:Check the config/go file on the flash drive looks OK as there is no sign of an attempt to run emhttpd which amongst other things starts the GUIWhat exactly do i have to check? the go file only contains gibberish:gÏ•kÐУãÆ6-)"a&W¥Dÿˆ¿Úäûô¼¸Ž[ºDŒÌš*àð·ûÉ|©7¿©OÁ︳ÍJ*HàÉwéq5
June 29, 20251 yr Community Expert Solution 12 hours ago, Zoraria said:What exactly do i have to check? the go file only contains gibberish:Replace it with one from an Unraid zip download.
June 29, 20251 yr Author 2 hours ago, JorgeB said:Replace it with one from an Unraid zip download.That worked thank you very much :)
June 29, 20251 yr Community Expert 15 hours ago, Zoraria said:What exactly do i have to check? the go file only contains gibberish:gÏ•kÐУãÆ6-)"a&W¥Dÿˆ¿Úäûô¼¸Ž[ºDŒÌš*àð·ûÉ|©7¿©OÁ︳ÍJ*HàÉwéq5All the .cfg files in the config folder should be human readable text. If they are not then the file has been corrupted and will need replacing/regeteating.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.