July 9, 2025Jul 9 Hi all,A few days ago my server was acting up (RAM usage was really high, probably a misconfiguration somewhere - I'll find it after I get the server working again) - so I restarted it, and it promptly didn't start back up.I just finally got a monitor hooked up, and I appeared to have this issue: https://forums.unraid.net/topic/129741-boot-failure-bzfirmware-checksum-error/I tried hitting ENTER once to restart, and it seemed to get farther into booting, but it didn't manage to assign itself an IP. For good measure, I tried following the recommendations on that forum topic. I replaced my boot USB with the 7.0.1 version files (that was the version I was on), and restored my config folder from a recent backup.Upon trying to boot again, I'm still having issues getting an IP. It's not setting a 169 IP or anything, it just says IPv4 address: not set; IPv6 address: not set.My diagnostics are attached :) natenas-diagnostics-20250708-2345.zip
July 9, 2025Jul 9 Author 6 hours ago, JorgeB said:Link detected: noNo link on eth0Very strange - the link should definitely be up.I get the activity LED on my switch as Unraid is posting, but then it goes away part way through the boot process.I tried a different cable as well, but that has the same behaviour.
July 9, 2025Jul 9 Author I had an extra NIC lying around so I gave that a try - it works normally with this NIC, so it seems my onboard NIC has failed for some reason...I do notice that all of my plugins appear to have disappeared. They all appear under Plugin File Install Errors...It looks like I may in fact need to replace that USB drive too, I immediately got the error:Disk Location: sda Alert - Device failure alert/dev/sg0: Unknown USB bridge [0x0951:0x1666 (0x001)] Edited July 9, 2025Jul 9 by NDBroughton
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.