July 29, 2025Jul 29 Hey,so after updating last week to 7.1.4 my webGUI crashes after a while. I can't pinpoint after how much time. Seems to be different every time. The problem is that SSH also refuses connection even though it is enabled and my Mac has SSH Keys exchanged with my Unraid server. So I can't get diagnostics.All my docker containers are working fine and continuing to work when the WebGUI crashes and SSH stops working. What I'm doing is disconnect my PSU as I have Unraid configured to do a clean shut down after 5mins off power. After that I power up the server and everything works for a while again.What could be the issue? Is there anything I can do to pinpoint the problem?
July 29, 2025Jul 29 Author Here are my diagnostics right after my startup.diagnostics-20250729_2322.zip
July 30, 2025Jul 30 Author Here is the syslog file.I had downgraded to 7.1.2 again after my last message but it's still happening.syslog-previous-20250730-0937.zip
July 30, 2025Jul 30 Community Expert Jul 30 10:41:16 moin kernel: e1000e 0000:00:1f.6 eth1: NIC Link is DownJul 30 10:41:16 moin kernel: bond0: (slave eth1): link status definitely down, disabling slaveJul 30 10:41:16 moin kernel: e1000e 0000:00:1f.6 eth1: left promiscuous modeJul 30 10:41:16 moin kernel: e1000e 0000:00:1f.6 eth1: left allmulticast modeJul 30 10:41:16 moin kernel: bond0: now running without any active interface!Jul 30 10:41:16 moin kernel: br0: port 1(bond0) entered disabled stateNIC link went down
July 30, 2025Jul 30 Author I'm trying to figure out what could be causing it? Any idea?Eth0 is my router connection via cableEth1 is the internal server connection? I don't really understand networking too well.This is how my Network settings look:Should I change anything?
July 30, 2025Jul 30 Author 2 minutes ago, WN1X said:Replace the ethernet cable between your Unraid server and your network.Even though my server is online and uploading something for example? I switched the cable anyway and tried a different LAN port on my server.EDIT: To add to this. "NIC Link is down" happens at boot I think. My WebGUI and SSH keeps working after that until it doesn't Edited July 30, 2025Jul 30 by unraid_fk34
July 30, 2025Jul 30 Community Expert According to the syslog, that was aprox. 1H after boot, and there wasn't any other active interface on the bond3 hours ago, JorgeB said:Jul 30 10:41:16 moin kernel: bond0: now running without any active interface!This suggests eth0 already had the link down or was disabled.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.