Hi,

 

i have a prolem with the SAS3082E-R Controller. I switch from Mainboard sata ports to the controller ports. I have a Biostar A760g M2+ Mainboard. Unraid is 4.7. All my 8 hdd´s was found from the controller. After booting unraid i saw all my 8 hdd´s. After i have allocate my hdd´s to the device ports in unraid, unraid said wrong disk configuration and i could not start the raid. All hdd´s have a red point.

 

Could anyone say something to the logfile please ?

 

Greets

Eisi

syslog.zip

Try restarting. You may need to update the firmware on the card. See here: http://www.servethehome.com/ibm-serveraid-br10i-lsi-sas3082e-r-pciexpress-sas-raid-controller/ Read the comments to find the correct firmware.

Hi,

 

thanks for your try to help me with my problem.

 

I have flashed this firmware: FW1.33 Bios 6.36.

 

http://lime-technology.com/forum/index.php?topic=12767.msg121129#msg121129

 

Could it be that the controller only work with unraid 5.0 ?

 

Greets

Eisi

 

Yes.

Hi,

 

thanks for your try to help me with my problem.

 

I have flashed this firmware: FW1.33 Bios 6.36.

 

http://lime-technology.com/forum/index.php?topic=12767.msg121129#msg121129

 

Could it be that the controller only work with unraid 5.0 ?

 

Greets

Eisi

 

Yes. I am pretty sure that you need to run 5 beta 12/12a, RC1, or newer for the correct LSI SAS driver.

Thanks for your help, i will wait for 5 Final and will test again.

 

Greets

Eisi