August 3, 2025Aug 3 As the title says:efThe drives are in the correct order.Fdisk output:gdisk of one of the failed drives:I've had some brilliant support on here in the past, so hoping there's an easy fix.Diagnostics attached!tower-diagnostics-20250803-1644.zip Edited August 3, 2025Aug 3 by Watcher56
August 4, 2025Aug 4 Community Expert Solution Actual partitions for disks 2 and 3 are not using the whole disk, 7.1.2 was ignoring that. With the array stopped type:sgdisk -o -a 8 -n 1:32K:0 /dev/sdesgdisk -o -a 8 -n 1:32K:0 /dev/sdfThis assumes that disk2 and disk are still sde and sdf. If that changed, change the commands accordingly. If that command gives you an error or warning about a damaged GPT table, post it. If not, reboot, and the array should then start.
August 4, 2025Aug 4 Author Amazing. Running those commands and a reboot did the trick. Back up and running and all the drives are happy. Thanks Jorge!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.