August 11, 2025Aug 11 Have been using a separate plex server for years without any issues. Recently upgraded to 7.1.2 and then these problems started cropping up. Specifically streaming will halt on the plex server and then you have to wait a few minutes and you can restart your show. On the plex server, which has an unraid share as a mount, I see this error on the plex side:Aug 11 03:56:26 plexserver kernel: [1387274.154052] CIFS: VFS: \\192.168.1.5 has not responded in 180 seconds. Reconnecting...Aug 11 03:57:26 plexserver kernel: [1387334.220430] CIFS: VFS: \\192.168.1.5 Send error in SessSetup = -11I don't always see corresponding logs on the Unraid side but occasionally this will show up at the same timestamp in the Unraid syslogAug 9 22:49:26 unraid smbd[1500923]: [2025/08/09 22:49:26.939894, 0] ../../source3/smbd/smb2_read.c:264(smb2_sendfile_send_data)Aug 9 22:49:26 unraid smbd[1500923]: smb2_sendfile_send_data: sendfile failed for file media/movie.mkv (Broken pipe) for client PID=1500923,CLIENT=8beae7b4-904b-3041-a678-2a029c90c722,channel=0,remote=ipv4:10.0.0.10:49670,local=ipv4:192.168.1.5:445. TerminatingNot sure where else to look for logs of what might be going on. Any possibility it's related to my upgrade to 7.1.2?
August 11, 2025Aug 11 Community Expert 2 hours ago, Milspeccqb said:Any possibility it's related to my upgrade to 7.1.2?Should not be, but you can try downgrading to the previous release you were using and retest.
December 21, 2025Dec 21 On 8/10/2025 at 9:22 PM, Milspeccqb said:Have been using a separate plex server for years without any issues. Recently upgraded to 7.1.2 and then these problems started cropping up. Specifically streaming will halt on the plex server and then you have to wait a few minutes and you can restart your show. On the plex server, which has an unraid share as a mount, I see this error on the plex side:Aug 11 03:56:26 plexserver kernel: [1387274.154052] CIFS: VFS: \\192.168.1.5 has not responded in 180 seconds. Reconnecting...Aug 11 03:57:26 plexserver kernel: [1387334.220430] CIFS: VFS: \\192.168.1.5 Send error in SessSetup = -11I don't always see corresponding logs on the Unraid side but occasionally this will show up at the same timestamp in the Unraid syslogAug 9 22:49:26 unraid smbd[1500923]: [2025/08/09 22:49:26.939894, 0] ../../source3/smbd/smb2_read.c:264(smb2_sendfile_send_data)Aug 9 22:49:26 unraid smbd[1500923]: smb2_sendfile_send_data: sendfile failed for file media/movie.mkv (Broken pipe) for client PID=1500923,CLIENT=8beae7b4-904b-3041-a678-2a029c90c722,channel=0,remote=ipv4:10.0.0.10:49670,local=ipv4:192.168.1.5:445. TerminatingNot sure where else to look for logs of what might be going on. Any possibility it's related to my upgrade to 7.1.2?I've been battling this same exact issue for weeks. Were you able to find a solution to this? Sorry to dig up an old thread.From my logs on the separate plex server[Sat Dec 20 06:51:55 2025] CIFS: VFS: \\server has not responded in 180 seconds. Reconnecting...[Sat Dec 20 06:51:55 2025] CIFS: trying to dequeue a deleted mid Edited December 21, 2025Dec 21 by VonSwoopington
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.