November 26, 2025Nov 26 Run to failure? I do have one extra SATA wire coming off my HBA I could swap.SMART Attributes Data Structure revision number: 10Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 078 064 044 - 63435056 3 Spin_Up_Time PO---- 091 089 000 - 0 4 Start_Stop_Count -O--CK 099 099 020 - 2029 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 086 060 045 - 386327305 9 Power_On_Hours -O--CK 066 066 000 - 30394 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 70 18 Head_Health PO-R-- 100 100 050 - 0187 Reported_Uncorrect -O--CK 100 100 000 - 0188 Command_Timeout -O--CK 100 100 000 - 0190 Airflow_Temperature_Cel -O---K 053 044 040 - 47 (Min/Max 40/48)192 Power-Off_Retract_Count -O--CK 100 100 000 - 92193 Load_Cycle_Count -O--CK 054 054 000 - 93516194 Temperature_Celsius -O---K 047 056 000 - 47 (0 15 0 0 0)195 Hardware_ECC_Recovered -O-RC- 009 001 000 - 63435056197 Current_Pending_Sector -O--C- 100 100 000 - 0198 Offline_Uncorrectable ----C- 100 100 000 - 0199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 142200 Pressure_Limit PO---K 100 100 001 - 0240 Head_Flying_Hours ------ 100 253 000 - 7667h+33m+43.187s241 Total_LBAs_Written ------ 100 253 000 - 18003672784242 Total_LBAs_Read ------ 100 253 000 - 1269847927595 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning mayorgoodway-diagnostics-20251126-1052.zip
November 26, 2025Nov 26 Community Expert The only errors I see are CRC errors, and these are not drive issues, but connection issues (typically related to power or SATA cabling).Occasional CRC errors are not an issue as they merely trigger a retry of a transfer. Note the CRC count never resets to 0 - you can only stop it from increasing. If you click on the orange icon against the drive on the dashboard and select the ‘acknowledge’ option from the menu displayed then Unraid will only notify you again if the count increases.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.