The Automatically and Scheduled activation by Default was an Option.

Actually only by Changes.

Than we have two independent Chains. Scheduled and by Changes.

Edited September 21Sep 21 by Revan335

On 9/17/2026 at 2:21 PM, XCrownedClownsX said:

The fixes are now available in FolderView Plus 2026.09.17.03:

• Added Edit folder defaults links for Docker and VMs, including defaults imported from FolderView3.

• Fixed hover previews on computers that also have a touchscreen.

• Fixed stopped-icon grayscale in Docker previews.

• Fixed mixed folder/container positions being lost after refresh.

• Fixed Dashboard cards staying narrow instead of filling the available widget width.

Please update to the latest stable version and hard-refresh the Unraid webGUI. Editing defaults affects future folders; existing folders stay unchanged unless you explicitly apply the defaults to them.

If anything still misbehaves, please share a fresh sanitized support bundle and a screenshot of the affected setting or layout.

sorry for delay in my reply i have been away.

thank you for the quick turnaround, i can test tonight.

Not sure if this is a bug introduced in the newest update, or a setting that I've missed, but after the update any line with a folder on it appears to have wider spacing than lines that don't. Is there an obvious setting that I'm missing? >.<

2 hours ago, Dalarielus said:

Not sure if this is a bug introduced in the newest update, or a setting that I've missed, but after the update any line with a folder on it appears to have wider spacing than lines that don't. Is there an obvious setting that I'm missing? >.<

That’s interesting and most likely a bug. Can you post your support bundle from diagnostics or dm it to me so I can take a further look?

1 hour ago, XCrownedClownsX said:

That’s interesting and most likely a bug. Can you post your support bundle from diagnostics or dm it to me so I can take a further look?

DMed to you :)

FolderView Plus 2026.10.07.16 is now available — introducing Quick finder!

This update adds Quick finder to the Docker and VM tabs, making it easier to find folders, containers, and virtual machines—especially when you have a lot of items organized into nested folders.

Click the magnifying glass immediately to the left of the Basic/Advanced toggle and start typing.

Search matches names and containing folder paths, including items inside collapsed nested folders. Results appear only after you start typing.

On the Docker tab, you can switch between All, Folders, and Containers. Folder and container results have separate, collapsible sections with result counts, your configured icons, and container status indicators.

Quick finder brings the relevant controls into the search results:

• Click a result to reveal and highlight it in the normal view, expanding its containing folders as needed.

• Focus folder to narrow the view to that folder.

• Edit folder to open its settings.

• Use the familiar Docker WebUI, console, and logs icons when those actions are available.

• Use the three-dot menu to access the existing folder or member actions.

For example, if you know which container you need but cannot remember where you put it, type its name and jump straight to it. You can also search a folder path to find the containers organized under that branch, or open an application’s WebUI directly from its result.

Unavailable shortcuts remain disabled, so the results reflect what Unraid can currently do.

The search follows the tab you’re using

On the VM tab, Quick finder searches VM folders and virtual machines. Its filters and available actions follow the VM view, including logs and the native VM menu where available.

The layout supports desktop and phone screens, light and dark themes, and keyboard navigation. Use the arrow keys to select a result, Enter to reveal it, and Escape to close search.

Search results also follow your Privacy settings, masking names, identifying icons, and folder paths when selected. Your typed query stays readable and is temporary—it is not saved or included in diagnostics.

Also included in this update

There is now a Report issue on GitHub button beside Export support bundle under Settings → Advanced → Diagnostics. It opens the issue forms in a separate tab, making it easier to report a problem while keeping your diagnostics available. Support bundles still need to be reviewed and attached manually.

This release also includes search interaction fixes, browser layout improvements, and updated documentation.

Your existing folders, assignments, preferences, and backup schedules are preserved.

Full release notes · Quick finder documentation

Give it a try and let me know how it works with your setup! If you encounter a problem, include your Unraid version, browser, FolderView Plus version, and a sanitized support bundle where relevant.

---

Edited October 7Oct 7 by XCrownedClownsX

Hi, I am experiencing a CSRF token issue that prevents file management using the folderview.plus plugin.

Environment:

• unRAID version: 7.3.3 (API version: 4.37.5+d4d97336)

• Plugin version: 2026.10.07.16

• Browser: Chrome 155.0.8059.40 (Official Build) (64-bit)

Issue: File management actions fail. I noticed the missing csrf_token error in my syslog. It appears the current plugin version might be incompatible with the latest Nginx/unRAID security mechanisms.

I don't have the exact reproduction steps right now as I just caught it in the logs, but I can reproduce it and fetch fresh syslog or browser console output if needed. Let me know!

4 hours ago, JaCh0o said:

Hi, I am experiencing a CSRF token issue that prevents file management using the folderview.plus plugin.

Environment:

• unRAID version: 7.3.3 (API version: 4.37.5+d4d97336)

• Plugin version: 2026.10.07.16

• Browser: Chrome 155.0.8059.40 (Official Build) (64-bit)

Issue: File management actions fail. I noticed the missing csrf_token error in my syslog. It appears the current plugin version might be incompatible with the latest Nginx/unRAID security mechanisms.

I don't have the exact reproduction steps right now as I just caught it in the logs, but I can reproduce it and fetch fresh syslog or browser console output if needed. Let me know!

Yes ill look at this issue and let you know if i need more information.

10 hours ago, JaCh0o said:

Hi, I am experiencing a CSRF token issue that prevents file management using the folderview.plus plugin.

Environment:

• unRAID version: 7.3.3 (API version: 4.37.5+d4d97336)

• Plugin version: 2026.10.07.16

• Browser: Chrome 155.0.8059.40 (Official Build) (64-bit)

Issue: File management actions fail. I noticed the missing csrf_token error in my syslog. It appears the current plugin version might be incompatible with the latest Nginx/unRAID security mechanisms.

I don't have the exact reproduction steps right now as I just caught it in the logs, but I can reproduce it and fetch fresh syslog or browser console output if needed. Let me know!

Please update to FolderView Plus 2026.10.13.06, confirm that version under Plugins, then hard-refresh the Unraid webGUI with Ctrl+F5 and repeat the action that failed.

This release includes these related fixes:

• Corrected Unraid CSRF token handling for plugin requests that make changes, while retaining Unraid’s CSRF checks and the plugin’s token/nonce protection.

• Changed custom-icon uploads to use form-encoded requests, with larger files split into individually authorized parts. This addresses the upload timeouts we reproduced during investigation.

• Raised the icon limit to 16 MB without requiring PHP or Nginx configuration changes.

• Fixed deleting the currently selected custom icon so all folder-editor previews return to the default icon.

Release notes for 2026.10.13.06

If it still fails, please reproduce it once on the updated version and provide:

1. Exact steps and location: which page/action fails, and whether it is a FolderView Plus action or Unraid’s native File Manager. Include the approximate time of the failure.

2. A fresh sanitized support bundle: open Settings → FolderView Plus → Advanced → Diagnostics, review the sanitized preview, and export it after reproducing the problem, preferably in the same browser tab.

3. Chrome DevTools evidence: press F12, enable Preserve log in Network, then reproduce the failure. Share any relevant Console errors and the failed request’s endpoint path, method, HTTP status, Response, and Timing. Include the full displayed error and any support/trace code.

4. Matching syslog lines: any fresh missing csrf_token, Nginx, PHP-FPM, FastCGI, or upstream errors around that time. If nothing appears, please say so.

Please redact server addresses, personal paths/names, cookies, tokens, and authorization details from screenshots or logs. There’s no need to share request payloads or a full HAR export.

That will let me determine whether the remaining failure is in the plugin’s request handling, the Unraid session/security checks, or another endpoint.

Hi,

I'm running into a UI bug on the Docker tab with FolderView Plus version 2026.10.13.06.

Whenever I start or stop a container, the loading spinner hangs forever and the container's context menu becomes completely unresponsive until I manually refresh the page (F5).

The container does actually start/stop perfectly in the background (the Network tab shows a 200 OK response), but the UI gets stuck waiting.

I checked the Chrome console and it throws this exact error right when the spinner hangs: [Violation] Permissions policy violation: unload is not allowed in this document (referencing dynamix.js)

I've attached my sanitized diagnostics bundle. Let me know if you need any other logs!

FolderView Plus Support Bundle-2026-10-14T15-11-50+00-00.json

@kikkawa Thanks for the report, I'll take a look to see what's going on.

23 hours ago, kikkawa said:

Hi,

I'm running into a UI bug on the Docker tab with FolderView Plus version 2026.10.13.06.

Whenever I start or stop a container, the loading spinner hangs forever and the container's context menu becomes completely unresponsive until I manually refresh the page (F5).

The container does actually start/stop perfectly in the background (the Network tab shows a 200 OK response), but the UI gets stuck waiting.

I checked the Chrome console and it throws this exact error right when the spinner hangs: [Violation] Permissions policy violation: unload is not allowed in this document (referencing dynamix.js)

I've attached my sanitized diagnostics bundle. Let me know if you need any other logs!

FolderView Plus Support Bundle-2026-10-14T15-11-50+00-00.json

Please update to FolderView Plus 2026.10.15.07. This includes fixes targeting the Docker UI issue you reported:

• Correctly match completed container actions when Unraid’s native container ID and the API-provided ID use different formats.

• Refresh container status and clear loading indicators for both standalone containers and containers inside folders.

• Update existing rows while preserving their context-menu handlers, so subsequent actions remain available without refreshing the page.

These fixes cover Start, Stop, Pause, Resume, and Restart.

Update through Plugins → Check for Updates, confirm FolderView Plus shows 2026.10.15.07, then hard-refresh the Docker and Dashboard pages with Ctrl+F5. Please try Start/Stop a couple of times without refreshing between actions and check that the spinner clears, the status changes, and the context menu remains usable.

The Permissions policy violation: unload is not allowed warning in dynamix.js was not confirmed as the cause. If it still appears, please check whether the spinner/menu issue persists.

If the problem persists, please send:

• Your Unraid version, Chrome version, and installed FolderView Plus version.

• The exact steps: which action hangs, whether the container is standalone or inside an expanded/collapsed folder, and whether its actual running state changes successfully.

• While the problem is visible, before pressing F5, use Docker → Tools → Capture page diagnostics. Then go to Settings → FolderView Plus → Advanced → Diagnostics, preview and export a fresh sanitized support bundle.

• Any console errors and their stack traces from that attempt, plus a screenshot or short recording if helpful. Please redact private container names, addresses, paths, and other identifying details.

The Diagnostics and Support guide explains the capture/export steps. Fresh diagnostics from the updated version will help us identify any remaining failures.

8 minutes ago, XCrownedClownsX said:

Please update to FolderView Plus 2026.10.15.07. This includes fixes targeting the Docker UI issue you reported:

• Correctly match completed container actions when Unraid’s native container ID and the API-provided ID use different formats.

• Refresh container status and clear loading indicators for both standalone containers and containers inside folders.

• Update existing rows while preserving their context-menu handlers, so subsequent actions remain available without refreshing the page.

These fixes cover Start, Stop, Pause, Resume, and Restart.

Update through Plugins → Check for Updates, confirm FolderView Plus shows 2026.10.15.07, then hard-refresh the Docker and Dashboard pages with Ctrl+F5. Please try Start/Stop a couple of times without refreshing between actions and check that the spinner clears, the status changes, and the context menu remains usable.

The Permissions policy violation: unload is not allowed warning in dynamix.js was not confirmed as the cause. If it still appears, please check whether the spinner/menu issue persists.

If the problem persists, please send:

• Your Unraid version, Chrome version, and installed FolderView Plus version.

• The exact steps: which action hangs, whether the container is standalone or inside an expanded/collapsed folder, and whether its actual running state changes successfully.

• While the problem is visible, before pressing F5, use Docker → Tools → Capture page diagnostics. Then go to Settings → FolderView Plus → Advanced → Diagnostics, preview and export a fresh sanitized support bundle.

• Any console errors and their stack traces from that attempt, plus a screenshot or short recording if helpful. Please redact private container names, addresses, paths, and other identifying details.

The Diagnostics and Support guide explains the capture/export steps. Fresh diagnostics from the updated version will help us identify any remaining failures.

Just updated and tested on mobile for now via tailscale as I'm not home but will test on pc as well.

However stopping/starting dockers no longer infinitely spins and changes state within seconds.

Thank you very much!

12 minutes ago, XCrownedClownsX said:

Please update to FolderView Plus 2026.10.15.07. This includes fixes targeting the Docker UI issue you reported:

• Correctly match completed container actions when Unraid’s native container ID and the API-provided ID use different formats.

• Refresh container status and clear loading indicators for both standalone containers and containers inside folders.

• Update existing rows while preserving their context-menu handlers, so subsequent actions remain available without refreshing the page.

These fixes cover Start, Stop, Pause, Resume, and Restart.

Update through Plugins → Check for Updates, confirm FolderView Plus shows 2026.10.15.07, then hard-refresh the Docker and Dashboard pages with Ctrl+F5. Please try Start/Stop a couple of times without refreshing between actions and check that the spinner clears, the status changes, and the context menu remains usable.

The Permissions policy violation: unload is not allowed warning in dynamix.js was not confirmed as the cause. If it still appears, please check whether the spinner/menu issue persists.

If the problem persists, please send:

• Your Unraid version, Chrome version, and installed FolderView Plus version.

• The exact steps: which action hangs, whether the container is standalone or inside an expanded/collapsed folder, and whether its actual running state changes successfully.

• While the problem is visible, before pressing F5, use Docker → Tools → Capture page diagnostics. Then go to Settings → FolderView Plus → Advanced → Diagnostics, preview and export a fresh sanitized support bundle.

• Any console errors and their stack traces from that attempt, plus a screenshot or short recording if helpful. Please redact private container names, addresses, paths, and other identifying details.

The Diagnostics and Support guide explains the capture/export steps. Fresh diagnostics from the updated version will help us identify any remaining failures.

Just updated and tested on mobile for now via tailscale as I'm not home but will test on pc as well.

However stopping/starting dockers no longer infinitely spins and changes state within seconds.

Thank you very much!

Hi,

Since the latest version I have some ui glitches...

Unraid: 7.3.4

Folder View Plus: 2026.10.27.05

Never had this issue before. When uninstalling folderview plus, the ui glitch is gone. Worked fine before, just since this version I started having issues.

Link with video

Edited Thursday at 11:19 AM3 days by Ritmjunk

35 minutes ago, Ritmjunk said:

Hi,

Since the latest version I have some ui glitches...

Unraid: 7.3.4

Folder View Plus: 2026.10.27.05

Never had this issue before. When uninstalling folderview plus, the ui glitch is gone. Worked fine before, just since this version I started having issues.

Link with video

Hi,

I am experiencing the exact same issue after updating to version 2026.10.27.05.

After spending a considerable amount of time troubleshooting, I isolated the cause to FolderView Plus. Rolling back to the previous version completely resolved the UI glitch for me.

I'll stick with the older version for now and wait for a fix in an upcoming release.

@Ritmjunk @karaa Thanks for reporting this, and sorry for the trouble.

2026.10.27.05 included changes intended to fix the Docker page bouncing I reproduced with Aurora. Since removing or rolling back FolderView Plus clears your glitches, I’m treating this as a likely regression in that update. Please stay on your working version for now.

Could you both share:

- Your browser and theme, including the Aurora version if you use it.

- Which page is affected, and whether Docker is in Basic or Advanced view.

- The last FolderView Plus version that worked correctly.

@karaa Could you also confirm your Unraid version?

If you still have 2026.10.27.05 installed, please capture the issue before refreshing.

Can both of you on the Docker tab, use Tools → Capture page diagnostics at the bottom, then export a fresh sanitized support bundle from Settings → FolderView Plus → Advanced → Diagnostics.

I’ll follow up here once I have a verified correction.

3 hours ago, XCrownedClownsX said:

Aurora Version

What is Aurora?

@Revan335 Unraid theme I was adding compatibility for.

15 hours ago, XCrownedClownsX said:

@Revan335 Unraid theme I was adding compatibility for.

Hi,

Sorry for the late reply, I wasn't available last night.

• Aurora theme not installed

• Browsers tested: Chrome, Brave, Firefox

• Only the Docker Tab is affected in Advanced/Simple/Private

• Previous version worked fine

Diagnostics: FolderView Plus Support Bundle-2026-10-30T07-27-33+00-00.json

12 hours ago, Ritmjunk said:

Hi,

Sorry for the late reply, I wasn't available last night.

• Aurora theme not installed

• Browsers tested: Chrome, Brave, Firefox

• Only the Docker Tab is affected in Advanced/Simple/Private

• Previous version worked fine

Diagnostics: FolderView Plus Support Bundle-2026-10-30T07-27-33+00-00.json

Thanks for sending the bundle and confirming the browser/theme details. It captured repeated Docker list rebuilds, which can restart the native autostart-switch animations. I corrected the deferred container-detail merge that could trigger those rebuilds. This fix applies with or without Aurora.

Please test main/stable 2026.10.30.05:

1. Go to Plugins → Check for Updates, update FolderView Plus, and confirm the installed version.

2. Hard-refresh Docker with Ctrl+F5 or Ctrl+Shift+R (Cmd+Shift+R on macOS).

3. Leave Docker idle for 1–2 minutes, then check Basic, Advanced and Privacy views, your usual Start/Stop and WebUI actions, and folder membership.

The correction preserves current container identities, membership facts and newer state while details load, and ignores stale details for removed or replaced containers. This release also fixes support-bundle false positives caused by version numbers and includes the Settings button/icon, tree-control and duplicate-heading corrections.

If the list still rebuilds or the switches keep animating, use Docker → Tools → Capture page diagnostics while it is happening, before refreshing again. Then export a fresh sanitized support bundle from Settings → FolderView Plus → Advanced → Diagnostics. Please review it before sharing and include the browser, affected view and a short clip if possible.

1 hour ago, XCrownedClownsX said:

Thanks for sending the bundle and confirming the browser/theme details. It captured repeated Docker list rebuilds, which can restart the native autostart-switch animations. I corrected the deferred container-detail merge that could trigger those rebuilds. This fix applies with or without Aurora.

Please test main/stable 2026.10.30.05:

1. Go to Plugins → Check for Updates, update FolderView Plus, and confirm the installed version.

2. Hard-refresh Docker with Ctrl+F5 or Ctrl+Shift+R (Cmd+Shift+R on macOS).

3. Leave Docker idle for 1–2 minutes, then check Basic, Advanced and Privacy views, your usual Start/Stop and WebUI actions, and folder membership.

The correction preserves current container identities, membership facts and newer state while details load, and ignores stale details for removed or replaced containers. This release also fixes support-bundle false positives caused by version numbers and includes the Settings button/icon, tree-control and duplicate-heading corrections.

If the list still rebuilds or the switches keep animating, use Docker → Tools → Capture page diagnostics while it is happening, before refreshing again. Then export a fresh sanitized support bundle from Settings → FolderView Plus → Advanced → Diagnostics. Please review it before sharing and include the browser, affected view and a short clip if possible.

Thank you so much for the quick fix!

Everything is ok for now.

Thank you!