March 29Mar 29 Hi, my unraid server seems to be randomly rebooting but only while the array is active. I'm only able to tell this because the GUI will go down for a little bit, then back up saying unclean shutdown and the array will be off. Tried replacing the boot USB problem continues, attached diagnostics file. Have tried leaving different dockers on/off problem continues.Not sure where to start so any help is appreciated, will update as I find out more.Thanks! saturn-diagnostics-20260329-0510.zip
March 29Mar 29 Community Expert Server rebooting by itself is almost always a hardware issue. CPU is not being correctly identified in the diags, is it an engineering sample? Also start by running memtest.
March 29Mar 29 Author Just now, JorgeB said:Server rebooting by itself is almost always a hardware issue. CPU is not being correctly identified in the diags, is it an engineering sample? Also start by running memtest.Yes the server runs dual xeon e5 2683v4 engineering samples that always show up as generic intel
March 29Mar 29 Author 1 minute ago, JorgeB said:Server rebooting by itself is almost always a hardware issue. CPU is not being correctly identified in the diags, is it an engineering sample? Also start by running memtest.Any recommendations for plugins for conducting a memtest? never done that before.
March 29Mar 29 Community Expert 1 hour ago, windshields said:dual xeon e5 2683v4 engineering samplesThat could be the issue.You can run memtest from the Unraid boot menu, there's also the Live Memory Tester plugin.
March 29Mar 29 Author 9 hours ago, JorgeB said:That could be the issue.You can run memtest from the Unraid boot menu, there's also the Live Memory Tester plugin.i've had this system running for about 5 years the problem is relatively new the CPU's haven't given me problems before.not writing off the possibility that one of them is kicking the bucket though, or something else in the system.wilco on the memtest Edited March 29Mar 29 by windshields
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.