April 9Apr 9 The issue started when I was trying to figure out why things that were downloading weren't getting since their proper files so I Mass copied and pasted a lot of shows from one folder to another not thinking that it would be too straining on the System since it was a simple folder switch but in inevitably ran my CPUs up and froze my computer I looked for Solutions on the unraid Reddit forum and it told me to try to safely power it down and and boot it back up and I did so but now I was having driver compatibility issues and 30 minutes after the driver compatibility issues trying to fix it in maintenance mode it says my boots Drive is either offline or corrupted mntower-diagnostics-20260408-2210.zip
April 9Apr 9 Community Expert Create a flash drive backup if you don't have one, but multiple USB devices are disconnecting, so possibly not the flash drive itself is the problemApr 8 18:45:40 MNTower kernel: usb 5-2.1: USB disconnect, device number 66Apr 8 18:45:40 MNTower kernel: usb 5-2.2: USB disconnect, device number 67Apr 8 18:45:40 MNTower kernel: usb 5-2.4: USB disconnect, device number 68Apr 8 18:45:41 MNTower emhttpd: offline: ANKEJE_USB3.0_DD56419883014-0:0 (sda) 4096 976754646Apr 8 18:45:41 MNTower emhttpd: offline: WD_My_Passport_2627_575837324441354C45375044-0:0 (sdd) 512 9767475200Apr 8 18:45:41 MNTower emhttpd: offline: WD_My_Book_25ED_575831324435323955353238-0:0 (sde) 512 7814035456Try using another USB port/controller for it.
April 9Apr 9 Author 10 hours ago, trurl said:Do you have a current flash backup?no i didnt make one , what would be the proper steps
April 9Apr 9 Author 7 hours ago, JorgeB said:Create a flash drive backup if you don't have one, but multiple USB devices are disconnecting, so possibly not the flash drive itself is the problemApr 8 18:45:40 MNTower kernel: usb 5-2.1: USB disconnect, device number 66Apr 8 18:45:40 MNTower kernel: usb 5-2.2: USB disconnect, device number 67Apr 8 18:45:40 MNTower kernel: usb 5-2.4: USB disconnect, device number 68Apr 8 18:45:41 MNTower emhttpd: offline: ANKEJE_USB3.0_DD56419883014-0:0 (sda) 4096 976754646Apr 8 18:45:41 MNTower emhttpd: offline: WD_My_Passport_2627_575837324441354C45375044-0:0 (sdd) 512 9767475200Apr 8 18:45:41 MNTower emhttpd: offline: WD_My_Book_25ED_575831324435323955353238-0:0 (sde) 512 7814035456Try using another USB port/controller for it.ill need to make a backup drive but also all of those hardrive are plugged in they appear in the "main" tab and sometimes they do disapear an says "no device" and idk why it randomly started doing that
April 9Apr 9 Author and is there any way that i can make a back up that saves all my configs and doesnt wipe everything on my drives
April 9Apr 9 Community Expert USB not recommend for assigned disks for many reasons.And SSDs in the parity array can only be written at parity speed, and cannot be trimmed. The proper place for that nvme is in a pool outside the array.It would be best to reconsider your hardware.
April 9Apr 9 Author What would be another method of connecting storage besides USB and a lot is there anything that's going to fix the issue that I'm having now or do I have to start over
April 9Apr 9 Community Expert Use a computer with multiple SATA ports. You would have to shuck your external drives to get to the internal drives inside them.Lots of builds in this subforum:https://forums.unraid.net/forum/35-unraid-compulsive-design/
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.