April 17Apr 17 Hi AllWhen i first setup my Unraid Server a number of years back I assigned a Parity Disk and then two data drives to Disk 1 and 2 in the array. I used the 1 and 2 slots in the assignment table. For some reason when I later added a temporary third disk I added it as Disk 6 in the assignment. Is it possible to now move that disk within unraid so that it is assigned as Disk 3?Can i simply stop the array, unnasign disk 6 (noting the serial number of disk that is there) and then simply assign to slot that )represent disk 3) and turn the array back on. Will Unraid be able to this whilst keeping the array as it is now, the data intact?Thankyou for any helpRaji
April 18Apr 18 Community Expert Solution Yes as long as you only have Parity1 and no Parity2 (parity2 the disk order matters)1. Stop the array.2. Tools > New Config (perverse all slots)3. On the MAIN page, move disk6 slot assignment to the disk3 slot4. Check "parity is valid" and start the array. Edited April 18Apr 18 by MowMdown
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.