Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

[HELP] 7.3.0 Causing Runaway Logging

Featured Replies

Upgraded from 7.2.6 [which does not have runaway logging]tower-diagnostics-20260514-1148.zip

 

LOG is now getting flooded with:

hid-generic 0003:051D:0003.0001: Event data for report 18 was too short (4 vs 2)

It is adding this entry 9-10 times every minute

under Tools/System Devices I see:

Bus 001 Device 002 Port 1-11 ID 051d:0003 American Power Conversion UPS

Diagnostics attached

 

Any suggestions to suppress this?

Any suggestions to correct this?

 

Thank you!

Solved by JorgeB

  • Community Expert
  • Solution

Try disabling the stock UPS service and using the NUT plugin instead; there appears to be an issue with the newer kernel and a few APC models.

  • Author

Thank you @JorgeB

Questions:

Does this plugin send a shutdown signal to my VMs and DOCKERs too?

If not, do I need to install ‘NUT Actions’ by ‘ich777’?

 

The following appears to have stopped the runaway logging:

I disable the built-in UPS service (apcupsd) in Unraid by:

·       Settings tab

·       UPS Settings (under User Preferences).

·       Change Start APC UPS daemon to No

·       Click Apply.

 

 

I added the ‘Network UPS Tools (NUT) for Unraid’ by ‘desertwitch’

·       Apps Tab

·       Network UPS tools (install)

·       Settings Tab

·       NUT Settings

·       Change Start Network UPS Tools Services to YES

·       Change Shutdown Mode to Battery Level

·       Change Battery Level to initiate shutdown to 20

·       Change Battery Replacement Notification to YES

·       Change UserName: private

·       Change Password: private

·       Click Apply

 

I then shutdown, then powered on Unraid.

 

  • Community Expert
8 hours ago, landS said:

Does this plugin send a shutdown signal to my VMs and DOCKERs too?

Yes, it starts a normal shutdown like the other one.

  • Author

Thank you )

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.