Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Full Height Bracket IBM BR10i M1015 M5014 M5015 LSI 9240-4i/8i 9260-4i/8i etc.

Featured Replies

Brand new PCI Mounting Bracket. International Shipping.

 

Fits IBM-LSI-Dell-HP-Supermicro-3ware and many other RAID cards.

 

30 Day No Hassle Warranty

 

Hole spacing between tabs is approximately 54mm or 2-1/8"

 

PM me or Click Here to Purchase

 

bracket10fa.jpg

 

A partial list of all the Raid cards is shown below

 

  Fits the following:

  • IBM ServeRAID BR10i, M1015, M5014, M5015
  • LSI Megaraid 8704EM2, 8308ELP, 8708ELP, 8708EM2, 9240-4i/8i, 9260-4i/8i, 9261-8i, 9750-4i/8i, 9207-8i
  • LSI SAS3082E-R, SAS3041X, SAS 3080X-R, SAS3081E-R, SAS 9211-4i, SAS 9211-4i/8i, 9550SXU-4LP/8LP
  • HP Smart Array P410
  • Intel RAID Controller SASUC8I, RS2WC080
  • Dell PERC H200
  • ATTO H308, H30F, H60F, H608, R30F, R608m
  • Fujitsu D2607
  • Supermicro SAT2-MV8, AOC-SASLP-MV8, AOC-SAS2LP-MV8, AOC-SAS2LP-H8IR
           
  • Screws Included
     
  • If you find that these fit cards not listed please reply so others will know. Thank You.

Do you happen to know if these will fit the Supermicro AOC-SASLP-MV8? I have a few open box ones that didn't ship with brackets. My measurements do indicate a distance of 54mm between the center of each screw hole, so it seems like they will work.

  • Author

Do you happen to know if these will fit the Supermicro AOC-SASLP-MV8? I have a few open box ones that didn't ship with brackets. My measurements do indicate a distance of 54mm between the center of each screw hole, so it seems like they will work.

 

The bracket tabs for your controller are designed to be mounted to the front of the card with the screws on the back. My bracket is opposite.

 

You will need approximately 5/16" (8mm) total clearance across the backside hole for this bracket tab to work without touching any of the circuit runs or pads.

 

Adaptec low profile controllers are the same front tab design as yours and the brackets work OK, but I have never used a Supermicro card and will not guaranty or be responsible for damages should you decide to use my brackets.

Thanks for the response. I was PMed by another member who does have some brackets that will work for me.

Excellent I was after these... just ordered 3 :)

  • Author

Excellent I was after these... just ordered 3 :)

 

Shipped,

Thank You

Great, I have been looking for one!

  • 2 months later...

Thanks for the response. I was PMed by another member who does have some brackets that will work for me.

 

Does he have any more?

Yeah, does he have any more full height AOC-SASLP brackets?

  • 2 months later...

BigXor no more thread bumping

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.