Hello good people

I've just upgraded my internet speed to 2500mbit, but i still have a download about 1000mbit..

Anyone who has an idea, on how to fix that?? I have 3 hdds and a nvme drive.. my primary array, is set so that all new downloads will go through nvme cache drive.. But is still slow

I have a 2500 mbit intel nic in my server

Anyone who have an idea??

Thank you

regards

You need to check your entire network from start to finish to make sure it is all fully capable of supporting 2.5Gbps, Modem/Router, Cables, NIC, Switches, whatever you are using. All of it has to support 2.5Gbps.

If you're using a commercial VPN service, you're likely capped at 1Gbps over the VPN.

What does your network widget report?

Edited Monday at 12:52 PM5 days by MowMdown

Hello again Thank you

My router supports the speed, and i've installed speedtest, which says 2500 mbit from my pc to my server.. My interface is also saying 2,5gbps..and my vpn is also not caped:(.. And i get full speed on my desktop:..

Anyone with an idea??

Run an iperf test between both PCs to confirm the LAN is all working at 2.5GbE

Hello again

I just installed chrome as a docker and it hits 2300mbit, without vpn, so i think that it must have something to do with my vpn:

On my desktop still no problem, i will try to see if i can use iperf

My cpu is an amd 3700x

Thank you

Hello again, and sorry for clicking on the solution button that was a mistake

here is the iperf

Connecting to host 192.168.0.233, port 5201

[ 5] local 192.168.0.233 port 60302 connected to 192.168.0.233 port 5201

[ ID] Interval Transfer Bitrate Retr Cwnd

[ 5] 0.00-1.00 sec 3.11 GBytes 26.7 Gbits/sec 0 895 KBytes

[ 5] 1.00-2.00 sec 3.15 GBytes 27.1 Gbits/sec 0 895 KBytes

[ 5] 2.00-3.00 sec 2.89 GBytes 24.9 Gbits/sec 0 895 KBytes

[ 5] 3.00-4.00 sec 3.09 GBytes 26.6 Gbits/sec 0 895 KBytes

[ 5] 4.00-5.00 sec 3.08 GBytes 26.5 Gbits/sec 0 895 KBytes

[ 5] 5.00-6.00 sec 3.12 GBytes 26.8 Gbits/sec 0 895 KBytes

[ 5] 6.00-7.00 sec 3.18 GBytes 27.3 Gbits/sec 0 895 KBytes

[ 5] 7.00-8.00 sec 3.18 GBytes 27.3 Gbits/sec 0 1023 KBytes

[ 5] 8.00-9.00 sec 3.21 GBytes 27.5 Gbits/sec 0 895 KBytes

[ 5] 9.00-10.00 sec 3.13 GBytes 26.9 Gbits/sec 0 256 KBytes

- - - - - - - - - - - - - - - - - - - - - - - - -

[ ID] Interval Transfer Bitrate Retr

[ 5] 0.00-10.00 sec 31.8 GBytes 27.3 Gbits/sec 0 sender

[ 5] 0.00-10.00 sec 31.8 GBytes 27.3 Gbits/sec receiver

iperf Done.

Test must be made between a client and the server, a loop test is not really worth anything.

Thank you..

Can you tell me how to do that??

3 hours ago, Mattti1912 said:

Thank you..

Can you tell me how to do that??

For a quick AI overview, Google iperf test

If you need more help, Google iperf test procedure

IF the AI is not enough, look at the links below the AI infor....

Edited Tuesday at 11:14 PM4 days by Frank1940
"look at the links below the AI infor...." was "look the link below the AI infor...."