Tuesday at 01:00 AM5 days Community Expert I been trying to upgrade my R730, not XD, to 7.3.x and being having no luck. 7.2.6 runs fine, that is what I'm running now. tried:Upgrade from GUICreated a new USB with 7.3.0 and 7.3.1No matter the way I do it stops with an IPMI error and reboots, while the 7.2.6 works fine. Trying the modprobe.blacklist=ipmi_si (suggested by AI 🙈) does not resolve the issue. Any help is much appreciated.
Tuesday at 06:48 AM4 days Community Expert Try booting with a different flash drive using a stock install, no key needed, just to see if it boots.
Tuesday at 10:30 AM4 days Author Community Expert 3 hours ago, JorgeB said:Try booting with a different flash drive using a stock install, no key needed, just to see if it boots.Done this with 3 different USB drives with both 7.2.6 and 7.3.x and as with the original USB drive, 7.2.6 booths fine but 7.3.x don't.
Tuesday at 10:55 AM4 days Community Expert If a different flash drive using a stock install still does' boot, it suggests some incompatibility between the newer kernel and the hardware. My suggestion would be to remain on 7.2.x for now and retest once a release with a newer kernel is out.
Wednesday at 03:19 PM3 days Author Community Expert Solution So this is what I had to change on the server to get it working:System BIOS → Processor SettingsXZAPIC Mode → EnabledSystem BIOS → Integrated DevicesSR-IOV Global Enable → EnabledI/OAT DMA Engine → Enabled
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.