Sunday at 04:15 PM1 day Hi,i have an uptime of 2 days, my system log is full of:Jul 5 16:11:45 BackTower kernel: pcieport 0000:00:1c.6: AER: Correctable error message received from 0000:00:1c.6Jul 5 16:11:45 BackTower kernel: pcieport 0000:00:1c.6: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)Jul 5 16:11:45 BackTower kernel: pcieport 0000:00:1c.6: device [8086:a116] error status/mask=00000001/00002000the pcieport 0000:00:1c.6 lines up with:[8086:a116] 00:1c.6 PCI bridge: Intel Corporation 100/C230 Series Chipset Family PCIe Root Port #7 (rev f1) backtower-diagnostics-20260705-1207.zip
Sunday at 08:57 PM1 day Community Expert Solution 4 hours ago, jordan_573 said:Jul 5 16:11:45 BackTower kernel: pcieport 0000:00:1c.6: AER: Correctable error message received from 0000:00:1c.6Jul 5 16:11:45 BackTower kernel: pcieport 0000:00:1c.6: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)Jul 5 16:11:45 BackTower kernel: pcieport 0000:00:1c.6: device [8086:a116] error status/mask=00000001/00002000I am not sure if this is the "best practices" method, but I had this exact same error with log spam and setting pcie_aspm=off fixed it for me. On the Main page, click on your boot device ("Internal Boot" or "Boot(Flash)", etc), then under the Boot Parameters tab in the Power Management section you can set that with a toggle. Then just reboot.
Yesterday at 08:12 AM1 day Community Expert 11 hours ago, CandleSir said:pcie_aspm=offYep, this is the first option you should try; there's another one if this one doesn't work, but it only suppresses the errors.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.