June 23, 201214 yr UPDATE - I went back to the flash drive to see what files had been mnodified diring attempted upgrade and those included the super.dat file. When I copied the old one from 4.7 over the revised one, everything was back to normal. Now I have to figure out why no web gui is available after the 5.0 upgrade. Suggestions appreciated. All, I followed the upgrade instructions for 4.7->5.0rc and after I copied bzimage and bzroot extracted from the zip file, on reboot, no web gui, just the command prompt. So I re-copied the 4.7 bzimage and bzroot files back to the flash drive and rebooted. This time I was able to launch the web gui but the array was stopped with a bunch of DISK_WRONG errors. I checked in the device list and the correct drives are in the correct slots. I think this has to do with the model# vs serial # id differences betw. 4.7 and 5.0 but I can't find a fix. I searched on several terms. Here are the pertinent lines from the syslog: Jun 22 20:53:09 Tower kernel: md: import disk0: [8,0] (sda) WDC WD20EARS-00M WD-WCAZA0409404 size: 1953514552 Jun 22 20:53:09 Tower kernel: md: disk0 wrong Jun 22 20:53:09 Tower kernel: md: import disk1: [8,16] (sdb) ST32000542AS 5XW1BG5D size: 1953514552 Jun 22 20:53:09 Tower kernel: md: disk1 wrong Jun 22 20:53:09 Tower kernel: md: import disk2: [8,32] (sdc) ST32000542AS 5XW17WHL size: 1953514552 Jun 22 20:53:09 Tower kernel: md: disk2 wrong Full syslog attached. Thanks!
June 24, 201214 yr I just tried to go from 4.7 to 5 rc5 and got no web gui either. Putty works and I'm able to use the web browser and get to the Unmenu screen, but the main web gui is gone. WTF?
Archived
This topic is now archived and is closed to further replies.