Need a little help.  I'm going from 4.7 to 5 rc5.  I'm following the instructions and I'm at the point where I reboot the server.  I do not have a monitor on my server so I rely on Putty or IE.  I prefer just using the web gui.  However, I cannot connect via my web browser.  I see mostly a blank page, but there is a Lime Tech banner at the top.  There is one button / link below the banner, but it's not in English so I don't know what it says.  The link doesn't work.  There is another button at the top right that says log, it gave me the following,

 

Jun 24 10:14:27 Tower emhttp_event: disks_mounted

Jun 24 10:14:27 Tower emhttp: shcmd (54): :>/etc/samba/smb-shares.conf

Jun 24 10:14:27 Tower emhttp: Restart SMB...

Jun 24 10:14:27 Tower emhttp: shcmd (55): killall -HUP smbd

Jun 24 10:14:27 Tower emhttp: shcmd (56): ps axc | grep -q rpc.mountd

Jun 24 10:14:27 Tower emhttp: _shcmd: shcmd (56): exit status: 1

Jun 24 10:14:27 Tower emhttp: shcmd (57): /usr/local/sbin/emhttp_event svcs_restarted

Jun 24 10:14:27 Tower emhttp_event: svcs_restarted

Jun 24 10:22:31 Tower in.telnetd[3928]: connect from 10.11.79.167 (10.11.79.167)

Jun 24 10:22:35 Tower login[3929]: ROOT LOGIN on '/dev/pts/0' from '10.11.79.167'

 

How can I access my server via my web browser so I can continue with the upgrade?

 

Is there a special port I need to use now when accessing via web gui?

 

Update: Putty works fine and so does UnMenu on port 8080.  The main web gui is not loading.  Another scary part is that UnMenu shows my Array started.  This was the part of the instructions that said it should come up at a STOP state and I will need to confirm drives are ok, reconfigure cache drivce, then START.  Not sure why the array started on it's own.  That said, the drives all look fine.  The cache drive is not configured so it looks like it saw everything was ok and just started.

I only run the UnMenu addon and the packages within there are very limited, APC, Notify, etc.  I didn't change any of these prior to my upgrade. 

 

I changed the root password via telnet.

 

syslog attached. 

 

Thanks!

nowebgui.txt

Remove the php package from unMenu and reboot

 

 

http://lime-technology.com/forum/index.php?topic=20371.0

Thanks!  I will try that.  Unmenu will not load now, so I'll have to power off and load the usb drive in my pc.  I assume the manual process to remove php package would be to just delete the files in the Packages folder (I see 4 or 5) and to delete the one file in the UnMenu folder, php-unmenu-package.conf

 

Would that be correct?

Yes, I ended up just going to simple features though.. I use the same basic packages as you.