20 hours ago20 hr Hi everyone,I recently added two brand new 28TB Seagate IronWolf Pro drives (ST28000NT000) to my system and started an extended SMART self-test on both.The tests have been running for about 24–25 hours now, but the Unraid WebGUI still shows the progress at 20% (and smartctl -c reports 80% of test remaining). The recommended polling time from the firmware is ~2439 minutes (~40.5 hours).Both drives behave identically and the SMART attributes look clean so far (0 pending sectors, 0 reallocated sectors, 0 uncorrectable errors, power-on hours: ~25h).Is it normal for these large Seagate drives to stay at "80% remaining" for this long due to non-linear firmware reporting, or could the test be hanging? Should I just let them continue running?Thanks in advance for your help!
20 hours ago20 hr Community Expert Don't think that would be normal, but Unraid only reports the SMART test progress given by SMART itself; I would wait a day or so to see if there's any progress.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.