19 hours ago19 hr I'm having issues reaching 10GBE speeds. I've tried disabling ASPM in bios, disabling flow control in my Unifi switch, enabling and disabling MTU, setting MTU to 1500 and 9000, and many more settings I already forgot.I have a desktop connected to a Unifi switch via 10GBE. Desktop PC says its connected at 10G. Cool!Then I have a Unraid server. Motherboard is a MSI MPG B-560 Gaming Edge Wifi. My Unraid server is connected to the Unifi switch via a custom DAC cable, built for Intel and Unifi systems. Both ends are connected to their proper device.Anyways, I'm using a M.2 to SFP+ adapter, why you ask, because the other M.2 slot is occupied by an NVME card.What suggestions can you guys give me to rectify my situation I'm having.I've used iperf3 and was able to get a 180MB's, not even close to 10GBE.Thank youtower-diagnostics-20260912-2128.zip Edited 18 hours ago18 hr by Mania
13 hours ago13 hr Community Expert If iperf shows the low speed, it's typically a NIC (or its drive/settings), cable, switch, or client PC, try swapping some of those to rule things out.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.