Thursday at 06:11 PM3 days Just logged into my server today and noticed that Parity 2 had a red x icon next to it. Also noticed that it was disabled and the disk is listed under Unassigned Disk Devices. Any advice on what the issue may be?Thanks in advance! badwolf-diagnostics-20261008-1053.zip
Thursday at 06:14 PM3 days Community Expert Syslog shows constant ATA errors with parity and parity2, check/replace cables for both, then resync parity2. Also, any power splitters in use?
Friday at 03:59 PM2 days Author 21 hours ago, JorgeB said:Syslog shows constant ATA errors with parity and parity2, check/replace cables for both, then resync parity2. Also, any power splitters in use?I have replaced the Sata cables just in August cause my Disk 2 was having issues. As for power splitters, it's been so long since I built it but it is a possibility that I used one.
Friday at 04:08 PM2 days Community Expert Recommend checking that, since it's very possible it's something both disks have in common.
Friday at 05:36 PM2 days Author 1 hour ago, JorgeB said:Recommend checking that, since it's very possible it's something both disks have in common.Do you think they are just loose or replacing them?
Friday at 05:43 PM2 days Community Expert If it's a splitter, recommend replacing it, or better yet, stop using one if possible. Also, if it's a SATA to SATA splitter, make sure it's not splitting one plug to more than two.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.